Microchip Digital Potentiometer 2-Position 12 kΩ Linear 2-Channel 14-Pin SOIC
- N° de stock RS:
- 209-7663P
- Référence fabricant:
- MCP42010-I/SL
- Fabricant:
- Microchip
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 209-7663P
- Référence fabricant:
- MCP42010-I/SL
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Product Type | Digital Potentiometer | |
| Resistance | 12kΩ | |
| Taper Type | Linear | |
| Temperature Coefficient | 800 ppm/°C | |
| Memory Type | Volatile | |
| Number of Pots per Package | 2 | |
| Mount Type | Through Hole | |
| Interface Type | SPI | |
| Package Type | SOIC | |
| Pin Count | 14 | |
| Minimum Supply Voltage | 3.3V | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Series | MCP42010 | |
| Standards/Approvals | No | |
| Height | 3.35mm | |
| Length | 19.05mm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Product Type Digital Potentiometer | ||
Resistance 12kΩ | ||
Taper Type Linear | ||
Temperature Coefficient 800 ppm/°C | ||
Memory Type Volatile | ||
Number of Pots per Package 2 | ||
Mount Type Through Hole | ||
Interface Type SPI | ||
Package Type SOIC | ||
Pin Count 14 | ||
Minimum Supply Voltage 3.3V | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Series MCP42010 | ||
Standards/Approvals No | ||
Height 3.35mm | ||
Length 19.05mm | ||
Automotive Standard No | ||
The Microchip MCP42010-I/SL is a dual-channel, 8-bit digital potentiometer features 10kΩ end-to-end resistance value with an SPI serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP42010 has outstanding AC and DC characteristics, and consumes <1 μA during static operation. Applications such as digital potentiometer include audio equipment (volume and tone controls), servo-motor control, battery charging and control, communications (line impedance matching), power supplies, instrumentation (gain, offset adjust), LCD contrast control and programmable filters. The MCP42010-I/SL is available in 8-pin PDIP and SOIC packages.
Two Resistor Networks
Potentiometer or Rheostat configuration options
Resistor Network Resolution
Zero-Scale to Full-Scale Wiper operation
SPI Compatible Serial interface