FTDI Chip USB NMC-2.5M USB to USB Null Modem Cable for use with PC To PC Networking Using USB Port, File Transfer

Voir la catégorie
Temporairement en rupture de stock
N° de stock RS:
537-420
Numéro d'article Distrelec:
304-08-729
Référence fabricant:
USB NMC-2.5M
Fabricant:
FTDI Chip
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

FTDI Chip

Product Type

Cable

Accessory Type

USB to USB Null Modem Cable

For Use With

PC To PC Networking Using USB Port, File Transfer Between PCs

Standards/Approvals

FCC and CE

FTDI Chip Null Modem Cable


The FTDI chip null modem cable is a modern replacement for the traditional serial null-modem cable. It allows a user to connect two PCs using their USB ports. The user can then perform file transfers between the PCs via the USB interface. This cable contains a small internal electronic circuit board, encapsulated into the USB connector at both ends of the cable. The electronic is based on the FTDI FT232R USB to serial UART IC and it handles all the USB signalling and protocols. This cable is a USB powered with 2.0 full speed compatible and 2.5m cable that supports data transfer rate up to 3Mbaud at TTL levels.

Features and Benefits


Based on back to back FTDI FT232RQ devices

Entire USB protocol handled by USB connector encapsulated electronics

Lower operating (20mA) and USB suspend mode current (70μA)

Operating temperature ranges between -40°C and 85° C

Support for USB suspend and resume

UHCI/OHCI/EHCI host controller compatible

USB 2.0 full speed compatible

USB Type A connector on both ends of cable

Applications


File transfer between PCs

Password protected file transfer between PCs

PC to PC networking using USB port

Certifications


ANSI/ESD S20.20:2014

BS EN 61340-5-1:2007

Liens connexes