Dormer P611 Series Ball Nosed Tree Deburring Tool, 3 mm Carbide
- N° de stock RS:
- 272-9449
- Référence fabricant:
- P6113.0X3.0
- Fabricant:
- Dormer
Sous-total (1 unité)*
8,93 €
(TVA exclue)
10,81 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 1 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 8 unité(s) expédiée(s) à partir du 06 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 8,93 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 272-9449
- Référence fabricant:
- P6113.0X3.0
- Fabricant:
- Dormer
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Dormer | |
| Cut Type | Single Cut | |
| Product Type | Deburring Tool | |
| Head Shape | Ball Nosed Tree | |
| Head Material | Carbide | |
| Application | To Deburr | |
| Finish | Bright | |
| Head Diameter | 3mm | |
| Standards/Approvals | No | |
| Shank Diameter | 3mm | |
| Overall Length | 38mm | |
| Series | P611 | |
| Sélectionner tout | ||
|---|---|---|
Marque Dormer | ||
Cut Type Single Cut | ||
Product Type Deburring Tool | ||
Head Shape Ball Nosed Tree | ||
Head Material Carbide | ||
Application To Deburr | ||
Finish Bright | ||
Head Diameter 3mm | ||
Standards/Approvals No | ||
Shank Diameter 3mm | ||
Overall Length 38mm | ||
Series P611 | ||
Statut RoHS : Exempté
- Pays d'origine :
- IE
The Dormer Rotary Burr has VA single cut flute style with medium spaced edges for multi angle contouring, rounding of edges and cutting into hard to reach areas. It has carbide tipped with toughened and hardened steel shank and bright finish. The carbide design is used for cutting diameter up to 6 mm or above 6 mm carbide head with toughened and hardened steel shank. It is primary use for curved surface deburring and carving with free hand deburring and carving.
Ball nosed tree shape
Bright due to uncoated
Stainless steel cut geometry
Supports Dormer standards
Fillet radii deburring possible
Closed groove deburring and carving possible
Liens connexes
- Dormer P611 Series Ball Nosed Tree Deburring Tool, 6.3 mm Carbide
- Dormer P611 Series Ball Nosed Tree Deburring Tool, 6 mm Carbide
- Dormer P611 Series Ball Nosed Tree Deburring Tool, 9.6 mm Carbide
- Dormer P611 Series Ball Nosed Tree Deburring Tool, 8 mm Carbide
- Dormer P611 Series Ball Nosed Tree Deburring Tool, 12.7 mm Carbide
- Dormer P811 Series Ball Nosed Tree Deburring Tool, 3 mm Carbide
- Dormer P811 Series Ball Nosed Tree Deburring Tool, 6.3 mm Carbide
- Dormer P811 Series Ball Nosed Tree Deburring Tool, 8 mm Carbide