DOGA Brushed Geared DC Geared Motor, 12V dc, 20 Nm, 100rpm, 10 mm Shaft Diameter
- N° de stock RS:
- 773-6784
- Référence fabricant:
- 111.9199.20.00
- Fabricant:
- DOGA
Sous-total (1 unité)*
203,40 €
(TVA exclue)
246,11 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 6 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 203,40 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 773-6784
- Référence fabricant:
- 111.9199.20.00
- Fabricant:
- DOGA
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | DOGA | |
| Product Type | DC Geared Motor | |
| Supply Voltage | 12V dc | |
| Sub Type | Brushed Geared | |
| Output Speed | 100rpm | |
| Shaft Diameter | 10mm | |
| Maximum Output Torque | 20Nm | |
| Mount Type | Screw | |
| Gearhead Type | Worm | |
| Gear Ratio | 59:2 | |
| Material | Polylactic Acid | |
| Current Rating | 48A | |
| Shaft Length | 22mm | |
| Length | 178mm | |
| Width | 60mm | |
| Standards/Approvals | RoHS | |
| Depth | 100.6mm | |
| Series | 111 | |
| Core Construction | Iron Core | |
| Sélectionner tout | ||
|---|---|---|
Marque DOGA | ||
Product Type DC Geared Motor | ||
Supply Voltage 12V dc | ||
Sub Type Brushed Geared | ||
Output Speed 100rpm | ||
Shaft Diameter 10mm | ||
Maximum Output Torque 20Nm | ||
Mount Type Screw | ||
Gearhead Type Worm | ||
Gear Ratio 59:2 | ||
Material Polylactic Acid | ||
Current Rating 48A | ||
Shaft Length 22mm | ||
Length 178mm | ||
Width 60mm | ||
Standards/Approvals RoHS | ||
Depth 100.6mm | ||
Series 111 | ||
Core Construction Iron Core | ||
- Pays d'origine :
- ES
Type 111 Geared dc Motors
DC motors are most commonly used in variable speed and torque applications. The range of IP 53 Doga DC motors are powered by direct current from a battery or DC power supply. Worm gears are used when large gear reductions are needed. The worm gear is useful for a comprehensive range of applications, such as conveyor systems, in which the locking feature can act as a brake for the conveyor when the motor is not turning.
Liens connexes
- DOGA Brushed Geared DC Geared Motor 40 Nm 12 mm Shaft Diameter
- DOGA Brushed Geared DC Geared Motor 20 Nm 10 mm Shaft Diameter
- DOGA Brushed Geared DC Geared Motor 40 Nm 12 mm Shaft Diameter
- DOGA Brushed Geared DC Geared Motor 60 Nm 12 mm Shaft Diameter
- DOGA Brushed Geared DC Geared Motor 25 Nm 9 mm Shaft Diameter
- DOGA Brushed Geared DC Geared Motor 25 Nm 9 mm Shaft Diameter
- DOGA Brushed Geared DC Geared Motor 24V dc 240rpm, 9 mm Shaft Diameter
- DOGA Brushed Geared DC Geared Motor 24V dc 40rpm, 9 mm Shaft Diameter