HARTING, D-Sub Standard Series, size 1.04 mm Male Crimp Circular Connector Contact, Gold over Nickel Signal 18 AWG
- N° de stock RS:
- 190-3381
- Référence fabricant:
- 09670003576
- Fabricant:
- HARTING
Visuel non contractuel
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 sachet de 100 unités)*
61,90 €
(TVA exclue)
74,90 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 1 600 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 700 unité(s) expédiée(s) à partir du 16 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | Le Sachet* |
|---|---|---|
| 100 - 400 | 0,619 € | 61,90 € |
| 500 - 1900 | 0,595 € | 59,50 € |
| 2000 - 4900 | 0,565 € | 56,50 € |
| 5000 - 14900 | 0,548 € | 54,80 € |
| 15000 + | 0,533 € | 53,30 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 190-3381
- Référence fabricant:
- 09670003576
- Fabricant:
- HARTING
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | HARTING | |
| Gender | Male | |
| Product Type | Circular Connector Contact | |
| Contact Material | Nickel | |
| Contact Plating | Gold over Nickel | |
| Maximum Contact Resistance | 20mΩ | |
| Contact Type | Signal | |
| Minimum Wire Size mm² | 0.33mm² | |
| Maximum Wire Size mm² | 0.82mm² | |
| Series | D-Sub Standard | |
| Contact Size | 1.04 mm | |
| Termination Type | Crimp | |
| Length | 14.2mm | |
| Standards/Approvals | No | |
| Maximum Wire Size AWG | 18AWG | |
| Minimum Wire Size AWG | 22AWG | |
| Sélectionner tout | ||
|---|---|---|
Marque HARTING | ||
Gender Male | ||
Product Type Circular Connector Contact | ||
Contact Material Nickel | ||
Contact Plating Gold over Nickel | ||
Maximum Contact Resistance 20mΩ | ||
Contact Type Signal | ||
Minimum Wire Size mm² 0.33mm² | ||
Maximum Wire Size mm² 0.82mm² | ||
Series D-Sub Standard | ||
Contact Size 1.04 mm | ||
Termination Type Crimp | ||
Length 14.2mm | ||
Standards/Approvals No | ||
Maximum Wire Size AWG 18AWG | ||
Minimum Wire Size AWG 22AWG | ||
- Pays d'origine :
- CH
HARTING Pin Contact
The HARTING D-Sub standard series male pin contact has a contact size of 1.04mm and wire size ranging between 18AWG and 22AWG. This contact is made from nickel and has gold over nickel plating. It can be used with D-Sub connectors.
Note:
For associated crimp tool, see 693-1137 and for locator tool, see 747-1670
HAN® M12
Also offered is a range of ready-to-use M12 system cables for quick wiring of sensors and actuators.
Features and Benefits
Crimp termination
Length is 14.2mm
Liens connexes
- HARTING size 1.04 mm Male Crimp Circular Connector Contact, Gold over Nickel Signal 18 AWG
- HARTING Female Crimp D-Sub Connector Contact, Gold over Nickel Signal 24 AWG
- HARTING Male Crimp D-Sub Connector Contact, Gold over Nickel Signal 24 AWG
- HARTING size 1.8 mm Female Crimp Circular Connector Contact, Gold over Nickel Signal 18 AWG
- HARTING Male Crimp D-Sub Connector Contact, Gold over Nickel Pin 24 AWG
- HARTING Female Crimp D-Sub Connector Contact, Gold over Nickel Crimp 24 AWG
- HARTING Male Crimp D-Sub Connector Contact, Gold over Nickel Crimp 24 AWG
- HARTING size 2.6 mm Male Male Connector Contact, Gold over Palladium Nickel over Nickel Pneumatic