MH Connectors MHDTPK 25 Way Straight D-Sub Connector
- N° de stock RS:
- 787-3836
- Référence fabricant:
- MHDTPK25-DB25P-K
- Fabricant:
- MH Connectors
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
3,36 €
(TVA exclue)
4,07 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 204 unité(s) prête(s) à être expédiée(s)
- Plus 69 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 49 | 3,36 € |
| 50 - 99 | 3,06 € |
| 100 - 249 | 2,87 € |
| 250 - 499 | 2,71 € |
| 500 + | 2,51 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 787-3836
- Référence fabricant:
- MHDTPK25-DB25P-K
- Fabricant:
- MH Connectors
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | MH Connectors | |
| Product Type | D-Sub Connector | |
| Number of Contacts | 25 | |
| Orientation | Straight | |
| Current | 5A | |
| Housing Material | Fibreglass Reinforced Polyethylene Terephthalate | |
| Voltage | 250V | |
| Minimum Operating Temperature | -55°C | |
| Termination Type | Solder | |
| Maximum Operating Temperature | 105°C | |
| Standards/Approvals | No | |
| Contact Material | Copper Alloy | |
| Contact Plating | Tin | |
| Series | MHDTPK | |
| Sélectionner tout | ||
|---|---|---|
Marque MH Connectors | ||
Product Type D-Sub Connector | ||
Number of Contacts 25 | ||
Orientation Straight | ||
Current 5A | ||
Housing Material Fibreglass Reinforced Polyethylene Terephthalate | ||
Voltage 250V | ||
Minimum Operating Temperature -55°C | ||
Termination Type Solder | ||
Maximum Operating Temperature 105°C | ||
Standards/Approvals No | ||
Contact Material Copper Alloy | ||
Contact Plating Tin | ||
Series MHDTPK | ||
- Pays d'origine :
- CN
D-Sub Connector Kits with Straight Metalized Plastic Hoods
These Kits of MH Connectors D-Sub MHDTPK Series are Straight 180° ABS Polylac Nickel plated backshells with either Pin or Socket connectors. The mating part of the stamped and formed contacts in the MHDBxSx Series connectors are Gold plated with the Solder Bucket terminations being Tin plated.
The Kits comprise of:
2 Backshell halves
2 4-40 Thumbscrews
2 Housing screws and 2 nuts
1 Set of non-metalized compression inserts for 4, 5, 7 and 9 mm diameter cable (Note maximum cable diameter is 13 mm)
D-Sub Connector Kits - MH
A range of D-sub Kits which contain a connector, hood and associated screws and cable glands or clamps as specified.
Approvals
UL 94 V-0 recognized
Liens connexes
- MH Connectors MHDTPPK 25 Way Straight D-Sub Connector
- MH Connectors MHDTPK 25 Way Straight D-Sub Connector Female
- MH Connectors MHDTPPK 25 Way Straight D-Sub Connector Female
- MH Connectors MHDM 25 Way Straight D-Sub Connector
- MH Connectors MHDTZK 25 Way Straight D-Sub Connector
- MH Connectors MHDPPK 25 Way Straight D-Sub Connector
- MH Connectors MHDTPPK 15 Way Straight D-Sub Connector
- MH Connectors MHDTPPK 9 Way Straight D-Sub Connector