TE Connectivity HD20 Series ABS D Sub Backshell, 25 Way, Strain Relief
- N° de stock RS:
- 680-9702
- Référence fabricant:
- 182667-1
- Fabricant:
- TE Connectivity
Indisponible
RS n'aura plus ce produit en stock.
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
la pièce
2,55 €
(TVA exclue)
3,09 €
(TVA incluse)
- N° de stock RS:
- 680-9702
- Référence fabricant:
- 182667-1
- Fabricant:
- TE Connectivity
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | TE Connectivity | |
| Number of Contacts | 25 | |
| Housing Material | ABS | |
| D-Sub Shell Size | B | |
| Body Orientation | Straight | |
| Colour | Black | |
| Strain Relief | Yes | |
| Series | HD20 | |
| Sélectionner tout | ||
|---|---|---|
Marque TE Connectivity | ||
Number of Contacts 25 | ||
Housing Material ABS | ||
D-Sub Shell Size B | ||
Body Orientation Straight | ||
Colour Black | ||
Strain Relief Yes | ||
Series HD20 | ||
- Pays d'origine :
- IT
AMPLIMITE D-Sub Connector, HDP-20, HD-20 and HDE Unshielded Cable Clamps, Backshells
Unshielded cable backshells or cable clamps for use with AMPLIMITE d-sub connectors. These backshells consist of 2 black plastic (ABS) shell halves with a straight cable exit.
Stock numbers 717-4599 is for use with HDP-20 Crimp Snap-In, HD-20 Solder Cup and HDE D-sub connectors.
These kits consist of 2 x backshells/cable clamps, 2 x fillister head screws, 2 x jack-screws, 2 x nuts, strain relief bar and cable gates.
Stock number 680-9702 is for use with HDP-20 Crimp Snap-In d-sub connectors and consist of 2 black plastic (ABS) shell halves, screw holder, clamping insert and screws. Stock number 680-9702 is 25 way.
Stock numbers 717-4599 is for use with HDP-20 Crimp Snap-In, HD-20 Solder Cup and HDE D-sub connectors.
These kits consist of 2 x backshells/cable clamps, 2 x fillister head screws, 2 x jack-screws, 2 x nuts, strain relief bar and cable gates.
Stock number 680-9702 is for use with HDP-20 Crimp Snap-In d-sub connectors and consist of 2 black plastic (ABS) shell halves, screw holder, clamping insert and screws. Stock number 680-9702 is 25 way.
TE Connectivity AMPLIMITE D-Subminiature Connectors
Liens connexes
- TE Connectivity HD20 Series ABS D Sub Backshell Strain Relief
- RS PRO ABS D Sub Backshell Strain Relief
- TE Connectivity ADK Series ABS D Sub Backshell Strain Relief
- TE Connectivity ADK Series ABS Right Angle D Sub Backshell Strain Relief
- MH Connectors MHDPPK-T/M Series ABS D Sub Backshell Strain Relief
- MH Connectors MHDTPK Series ABS D Sub Backshell Strain Relief
- MH Connectors MHDTPPK Series ABS D Sub Backshell Strain Relief
- MH Connectors MHCCOV Series ABS D Sub Backshell Strain Relief