FCT from Molex FMK Series Die Cast Zinc Straight D-Sub Backshell, 25 Way Strain Relief
- N° de stock RS:
- 291-6238
- Numéro d'article Distrelec:
- 144-17-703
- Référence fabricant:
- FMK3G-K201 / 1731110058
- Fabricant:
- FCT from Molex
Offre groupée disponible
Sous-total (1 unité)*
14,72 €
(TVA exclue)
17,81 €
(TVA incluse)
Ajouter 6 unités pour bénéficier d'une livraison gratuite
En stock
- 209 unité(s) prête(s) à être expédiée(s)
- Plus 1 686 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 24 | 14,72 € |
| 25 - 99 | 12,80 € |
| 100 - 249 | 11,83 € |
| 250 + | 10,58 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 291-6238
- Numéro d'article Distrelec:
- 144-17-703
- Référence fabricant:
- FMK3G-K201 / 1731110058
- Fabricant:
- FCT from Molex
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FCT from Molex | |
| Number of Contacts | 25 | |
| Product Type | D-Sub Backshell | |
| D-Sub Shell Size | B | |
| Housing Material | Die Cast Zinc | |
| Connector Type D | D-Sub Backshell | |
| Orientation | Straight | |
| Colour | Silver | |
| Strain Relief | Yes | |
| Series | FMK | |
| Housing Plating | Nickel | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque FCT from Molex | ||
Number of Contacts 25 | ||
Product Type D-Sub Backshell | ||
D-Sub Shell Size B | ||
Housing Material Die Cast Zinc | ||
Connector Type D D-Sub Backshell | ||
Orientation Straight | ||
Colour Silver | ||
Strain Relief Yes | ||
Series FMK | ||
Housing Plating Nickel | ||
Standards/Approvals No | ||
- Pays d'origine :
- DE
FCT from Molex D-Sub Backshell, 25 Way, Straight - FMK Series - FMK3G-K201 / 1731110058
This FCT backshell from Molex is a metal hood designed to provide high-quality protection for your D-subminiature (D-sub) connection. Its die-cast zinc material shields your connection from electromagnetic (EMI) and radio frequency interference (RFI) so the signal remains clear and uninterrupted. The hood is simple to install – simply tighten the backshell in place using the pre-mounted locking screws for a secure and reliable connection. As the backshell includes a strain relief for your cables, you can rely on it to reduce wear and prevent damage at the cable ends.
Features & Benefits
• Large inner chamber for use with D-sub connectors with special contacts
• Corrosion-resistant nickel plating to prevent buildups of rust
• Rubber bushing for effective cable insulation to prevent electrical hazards
• Accommodates a range of cable diameters for increased versatility
• Straight orientation for simple routing and organisation of cables
Applications
• Networking and communications
• Medical equipment
• Industrial automation
Can this backshell be used in high-heat applications?
Thanks to its broad operating temperature range of -35°C to +100°C, this hood is suitable for use in environments subject to extreme temperatures.
FMK Series Metal Hoods, Straight and Angled 45°
These FMK Series Metal Hood Backshells have a Large Inner Chamber and an Angled or Straight Cable Outlet. This large amount of internal space is particularly suitable for D-sub connectors with special contacts. The design of the FMK Series Metal Hood Backshell includes strain relief on the cable outlet. The FMK Series Metal Hood Backshell is easy to assemble thanks to the catch spring system and pre-mounted locking screws. The FMK Series Metal Hood Backshells can be used with engagement hooks and locking or knurled screws.
FMKx: Angled
FMKxG: Straight
FMKxx-K201: Large Cable Outlet
FMKx-4881: Dual Cable Outlet
Note
Stock number 764-9668 has dual cable (Ø8 → 12 mm) entry slot
Approvals
UL E168813
Warning
Stock no. 291-6288 is supplied without anti-kink feature
Liens connexes
- FCT from Molex FMK Series Die Cast Zinc D Sub Backshell Strain Relief
- FCT from Molex FMK Series Die Cast Zinc D Sub Backshell Strain Relief
- FCT from Molex FMK Series Die Cast Zinc D Sub Backshell Strain Relief
- FCT from Molex FMK Series Die Cast Zinc Angled D Sub Backshell Strain Relief
- FCT from Molex FMK Series Die Cast Zinc Angled D Sub Backshell Strain Relief
- FCT from Molex FMK Series Die Cast Zinc Angled D Sub Backshell Strain Relief
- FCT from Molex FMK Series Die Cast Zinc Angled D Sub Backshell Strain Relief
- FCT from Molex FMK Series Die Cast Zinc D Sub Backshell Strain Relief