Knipex Knipex 1.6 mm Small Bevel Side cutter
- N° de stock RS:
- 815-6388
- Référence fabricant:
- 77 32 120 H
- Fabricant:
- Knipex
Sous-total (1 unité)*
168,70 €
(TVA exclue)
204,13 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 1 unité(s) expédiée(s) à partir du 19 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 168,70 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 815-6388
- Référence fabricant:
- 77 32 120 H
- Fabricant:
- Knipex
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Knipex | |
| Product Type | Side cutter | |
| Sub Type | Diagonal Cutter | |
| Non-Sparking | No | |
| Overall Length | 120mm | |
| Jaw Width | 16mm | |
| Jaw Length | 14mm | |
| VDE/1000V Approved | No | |
| Height Safe | No | |
| Application | Electronic | |
| Jaw Material | Steel | |
| ESD Safe | No | |
| Handle Material | Bi-Metal | |
| Maximum Cutting Capacity | 1.6mm | |
| Standards/Approvals | ISO 9654 | |
| Cut Type | Small Bevel | |
| Sélectionner tout | ||
|---|---|---|
Marque Knipex | ||
Product Type Side cutter | ||
Sub Type Diagonal Cutter | ||
Non-Sparking No | ||
Overall Length 120mm | ||
Jaw Width 16mm | ||
Jaw Length 14mm | ||
VDE/1000V Approved No | ||
Height Safe No | ||
Application Electronic | ||
Jaw Material Steel | ||
ESD Safe No | ||
Handle Material Bi-Metal | ||
Maximum Cutting Capacity 1.6mm | ||
Standards/Approvals ISO 9654 | ||
Cut Type Small Bevel | ||
Non conforme
- Pays d'origine :
- DE
KNIPEX 77 32 120 H Electronics Diagonal Cutter with carbide cutting edges with multi-component handles 120 mm
77 32 120 H Electronics Diagonal Cutter with carbide cutting edges For extreme demands on cutting pliers caused by hard or tough materials, e.g. piano, nickel, tungsten and diode wire, such as those used more frequently in the electronics and aerospace industries. Always the right cutting tool, even with the hardest material. Precision carbide metal cutting edges soldered into forged blanks. Sturdy, zero-backlash box joint. Hardness of the carbide cutting edges 80 – 83 HRC. Pliers with carbide metal cutting edges have a substantially longer service life than such with conventional cutting edges. Constantly reliable cutting results due to the avoidance of cutter deformations caused by overloading. High cost saving due to longer service life of the pliers. pointed head with chamfer. with small bevel. - Cutting capacities medium hard wire (diameter): Ø 1.0mm- Cutting capacities hard wire (diameter): Ø 0.6mm- Cutting capacities piano wire (diameter): Ø 0.2mm- Cutting capacities soft wire (diameter): Ø 1.6mm- Jaw length (B): 14mm- Jaw thickness (joint) (D): 7.5mm- Head width (A): 11mm
Features and Benefits
Pointed Head With Chamfer
With Small Bevel
With Small Bevel
Technical attributes
For Extreme Demands On Cutting Pliers Caused By Hard Or Tough Materials, E.G. Piano, Nickel, Tungsten And Diode Wire, Such As Those Used More Frequently In The Electronics And Aerospace Industries
Always The Right Cutting Tool, Even With The Hardest Material
Precision Carbide Metal Cutting Edges Soldered Into Forged Blanks
Sturdy, Zero-Backlash Box Joint
Hardness Of The Carbide Cutting Edges 80 – 83 Hrc
Always The Right Cutting Tool, Even With The Hardest Material
Precision Carbide Metal Cutting Edges Soldered Into Forged Blanks
Sturdy, Zero-Backlash Box Joint
Hardness Of The Carbide Cutting Edges 80 – 83 Hrc
Liens connexes
- Knipex Knipex ESD Safe 1.6 mm Small Bevel Side cutter
- Knipex Knipex 1.6 mm Small Bevel Side cutter
- Knipex Knipex 1.3 mm Small Bevel Side cutter
- Knipex Knipex 1.6 mm Without Bevel Side cutter
- Knipex Knipex 1.6 mm With Bevel Side cutter
- Knipex Knipex ESD Safe 800 μm Small Bevel Side cutter
- Knipex Knipex 2 mm With Bevel Side cutter
- Knipex Knipex 1.7 mm Small Bevel Side cutter
