Weller Erem ESD Safe 1.3 mm Semi-Flush Cable Cutter
- N° de stock RS:
- 270-8510
- Numéro d'article Distrelec:
- 180-51-419
- Référence fabricant:
- T622N
- Fabricant:
- Weller Erem
Sous-total (1 unité)*
69,69 €
(TVA exclue)
84,32 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 47 unité(s) expédiée(s) à partir du 06 novembre 2026
- Plus 43 unité(s) expédiée(s) à partir du 06 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 69,69 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 270-8510
- Numéro d'article Distrelec:
- 180-51-419
- Référence fabricant:
- T622N
- Fabricant:
- Weller Erem
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Weller Erem | |
| Product Type | Cable Cutter | |
| Sub Type | Side Cutter | |
| Overall Length | 110mm | |
| Jaw Width | 9mm | |
| Jaw Length | 17mm | |
| VDE/1000V Approved | No | |
| Application | Microelectronic | |
| Jaw Material | High Grade Tool Steel | |
| ESD Safe | Yes | |
| Standards/Approvals | RoHS | |
| Maximum Cutting Capacity | 1.3mm | |
| Cut Type | Semi-Flush | |
| Sélectionner tout | ||
|---|---|---|
Marque Weller Erem | ||
Product Type Cable Cutter | ||
Sub Type Side Cutter | ||
Overall Length 110mm | ||
Jaw Width 9mm | ||
Jaw Length 17mm | ||
VDE/1000V Approved No | ||
Application Microelectronic | ||
Jaw Material High Grade Tool Steel | ||
ESD Safe Yes | ||
Standards/Approvals RoHS | ||
Maximum Cutting Capacity 1.3mm | ||
Cut Type Semi-Flush | ||
- Pays d'origine :
- CH
Weller Cable Cutter, 1.3mm Maximum Cutting Capacity, 110mm Overall Length - T622N
This cable cutter is a precision side cutter designed for microelectronic work and delicate wiring tasks. It is intended for users in automation, electronics, electrical and mechanical sectors who require accurate trimming and shearing of small conductors while protecting sensitive assemblies during handling.
Features and Benefits:
• Semi-flush cutting style for near-surface conductor trimming
• Maximum cutting capacity 1.3mm for fine wire work
• Jaw material MADE from high-grade tool steel for edge retention
• Jaw width 9mm enabling controlled access in tight spaces
• Jaw length 17mm for precise tip engagement
• Overall length 110mm for Compact workshop and bench use
• Maximum cutting capacity 1.3mm for fine wire work
• Jaw material MADE from high-grade tool steel for edge retention
• Jaw width 9mm enabling controlled access in tight spaces
• Jaw length 17mm for precise tip engagement
• Overall length 110mm for Compact workshop and bench use
Applications
• Suitable for trimming component leads on sensitive assemblies
• Ideal for cutting small multipair cables in control panels
• Used for wire preparation in automation equipment assembly
• Can be used for delicate cable work in prototype builds
• Used with ESD-protected workstations for sensitive electronics
• Ideal for cutting small multipair cables in control panels
• Used for wire preparation in automation equipment assembly
• Can be used for delicate cable work in prototype builds
• Used with ESD-protected workstations for sensitive electronics
Is this tool appropriate for electrostatic-sensitive environments?
Yes, it is ESD-safe, making it suitable for use at ESD-protected benches and handling sensitive components.
What approvals and environmental restrictions apply to its manufacture?
The tool complies with RoHS requirements restricting certain hazardous substances.
Can it cut thicker harnesses or large-gauge wire?
Its maximum cutting capacity is 1.3 mm, so it is intended for fine conductors rather than heavy-gauge cable.
Is the tool insulated for high-voltage electrical work?
It is not approved for 1000V DC applications and should not be used as the primary insulating tool for live circuits.
What characteristics support repeated precision use?
The jaws are MADE from high-grade tool steel, supporting Durable cutting edges and consistent performance in routine microelectronic tasks.
Liens connexes
- Weller Erem ESD Safe 1.3 mm Flush Cable Cutter
- Weller Erem ESD Safe 1.6 mm Semi-Flush Cable Cutter
- Weller Erem ESD Safe 1.8 mm Semi-Flush Cable Cutter
- Weller Erem ESD Safe 1.2 mm Semi-Flush Cable Cutter
- Weller Erem ESD Safe 1.5 mm Semi-Flush Cable Cutter
- Weller Erem ESD Safe 1.3 mm Super Full Flush Cable Cutter
- Erem 2412EW ESD ESD Safe Semi-Flush Side cutter
- Weller Erem 2-Piece Side cutter 15mm Jaw ESD Safe