Erem 530E12 ESD ESD Safe Flush Distance Cutter
- N° de stock RS:
- 240-0742
- Référence fabricant:
- 530E12
- Fabricant:
- Erem
Sous-total (1 unité)*
139,29 €
(TVA exclue)
168,54 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 3 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 139,29 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 240-0742
- Référence fabricant:
- 530E12
- Fabricant:
- Erem
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Erem | |
| Product Type | Distance Cutter | |
| Sub Type | Cable Cutter | |
| Overall Length | 120mm | |
| Jaw Length | 20mm | |
| VDE/1000V Approved | No | |
| Application | Microelectronic | |
| Height Safe | Yes | |
| ESD Safe | Yes | |
| Jaw Material | High Grade Tool Steel | |
| Material Cut | Copper | |
| Maximum Cutting Capacity | 1.2mm | |
| Standards/Approvals | RoHS | |
| Cut Type | Flush | |
| Sélectionner tout | ||
|---|---|---|
Marque Erem | ||
Product Type Distance Cutter | ||
Sub Type Cable Cutter | ||
Overall Length 120mm | ||
Jaw Length 20mm | ||
VDE/1000V Approved No | ||
Application Microelectronic | ||
Height Safe Yes | ||
ESD Safe Yes | ||
Jaw Material High Grade Tool Steel | ||
Material Cut Copper | ||
Maximum Cutting Capacity 1.2mm | ||
Standards/Approvals RoHS | ||
Cut Type Flush | ||
Weller Distance Cutter, 1.2mm Maximum Cutting Capacity, 120mm Overall Length - 530E12
This distance cutter is a precision tool designed for microelectronic and cable work where controlled, flush cuts are required. It is intended for use in environments sensitive to electrostatic discharge and in routine assembly or repair tasks within electronics, electrical and automation settings. The tool is Compact and intended for close-access operations on copper conductors and similar small-diameter wiring.
Features and Benefits:
• ESD-safe construction reduces static-related component damage
• Flush-cut geometry provides clean cable end finishes
• High-grade tool steel jaws maintain cutting edge under repeated use
• 1.2mm maximum cutting capacity handles fine conductors efficiently
• Height-safe design supports secure handling at elevated positions
• Flush-cut geometry provides clean cable end finishes
• High-grade tool steel jaws maintain cutting edge under repeated use
• 1.2mm maximum cutting capacity handles fine conductors efficiently
• Height-safe design supports secure handling at elevated positions
Applications
• Suitable for trimming copper conductor leads in assemblies
• Ideal for precision wire preparation in automation equipment
• Used for cable end finishing in electronic module production
• Can be used for small-scale electrical maintenance and repairs
• Used with microelectronic components requiring flush termination
• Ideal for precision wire preparation in automation equipment
• Used for cable end finishing in electronic module production
• Can be used for small-scale electrical maintenance and repairs
• Used with microelectronic components requiring flush termination
What materials is the tool intended to cut?
It is specified for cutting copper conductors and similar small-diameter wires up to the rated limit.
How does the tool address electrostatic concerns during handling?
The tool is constructed to be ESD-safe, helping to limit charge transfer when working near sensitive devices.
What standards relate to its environmental safety?
It complies with RoHS requirements, restricting certain hazardous substances in its manufacture.
How is operation affected by the jaw design?
The short, robust cutting edges provide a concentrated bite for precise flush cuts and controlled wire removal.
What operating environments suit this cutter?
It is appropriate for bench and field use in electronics, electrical and mechanical settings where fine, precise cutting is needed.
Liens connexes
- Erem 530E15A ESD ESD Safe Flush Distance Cutter
- Erem 549E12 ESD Flush ESD Safe Distance Cutter
- Erem 549E10 ESD Flush ESD Safe Distance Cutter
- Erem 530E13 ESD ESD Safe Flush Distance Cutter
- Erem 530E06 ESD ESD Safe Flush Distance Cutter
- Weller Erem ESD Safe Flush Distance Cutter
- Weller Erem Flush ESD Safe Cable Cutter Distance Cutter
- Erem 2422EA ESD Flush ESD Safe Wire Cutter