Erem 522 ESD ESD Safe Flush Side cutter
- N° de stock RS:
- 240-0738
- Référence fabricant:
- 522NW
- Fabricant:
- Erem
Sous-total (1 unité)*
105,04 €
(TVA exclue)
127,10 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 3 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 2 unité(s) expédiée(s) à partir du 28 août 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 105,04 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 240-0738
- Référence fabricant:
- 522NW
- Fabricant:
- Erem
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Erem | |
| Product Type | Side cutter | |
| Sub Type | Side Cutter | |
| Overall Length | 4.5in | |
| Jaw Length | 19mm | |
| VDE/1000V Approved | No | |
| Height Safe | Yes | |
| Application | Microelectronic | |
| ESD Safe | Yes | |
| Jaw Material | High Grade Tool Steel | |
| Material Cut | Copper | |
| Standards/Approvals | UPC | |
| Maximum Cutting Capacity | 1.57mm | |
| Cut Type | Flush | |
| Sélectionner tout | ||
|---|---|---|
Marque Erem | ||
Product Type Side cutter | ||
Sub Type Side Cutter | ||
Overall Length 4.5in | ||
Jaw Length 19mm | ||
VDE/1000V Approved No | ||
Height Safe Yes | ||
Application Microelectronic | ||
ESD Safe Yes | ||
Jaw Material High Grade Tool Steel | ||
Material Cut Copper | ||
Standards/Approvals UPC | ||
Maximum Cutting Capacity 1.57mm | ||
Cut Type Flush | ||
Weller Side cutter, 1.57mm Maximum Cutting Capacity, 4.5in Overall Length - 522NW
This side cutter is a precision tool designed for safe handling of delicate electronic components in static‑sensitive environments. It provides a flush trimming action suitable for working with conductive materials while maintaining electrostatic protection, and is intended for fine microelectronic tasks where accurate, clean cuts are required.
Features and Benefits:
• ESD protection reduces risk of electrostatic damage during handling
• High‑grade tool steel jaws ensure consistent cutting‑edge retention
• Flush cutting style delivers near‑level trim for minimal protrusion
• Maximum cutting capacity 1.57mm handles moderate‑gauge copper
• Jaw length 19mm offers controlled access in confined areas
• High‑grade tool steel jaws ensure consistent cutting‑edge retention
• Flush cutting style delivers near‑level trim for minimal protrusion
• Maximum cutting capacity 1.57mm handles moderate‑gauge copper
• Jaw length 19mm offers controlled access in confined areas
Applications
• Suitable for trimming copper leads on densely populated boards
• Ideal for precision microelectronic assembly and rework
• Used with sensitive components requiring electrostatic control
• Can be used for clean cuts of copper wire in tight spaces
• Ideal for precision microelectronic assembly and rework
• Used with sensitive components requiring electrostatic control
• Can be used for clean cuts of copper wire in tight spaces
Is this tool appropriate for cutting non‑metallic materials?
It is specified for cutting copper and optimised for conductive materials rather than plastics or fibre.
How does the tool support safe use at height?
The design is identified as height‑safe, allowing integration into working practices where tools must be secured during elevated tasks.
What approval standards does it meet?
It carries a UPC approval indicating conformity with the referenced certification requirements.
Does the tool offer insulation for live working?
It is not described as VDE1000V approved and therefore should not be used for live electrical insulation purposes.
Liens connexes
- Erem Flush ESD Safe Side cutter
- Erem 622 ESD ESD Safe Flush Side cutter
- Erem 2476 ESD Flush ESD Safe Side Cutter
- Erem 2477 ESD Flush ESD Safe Side Cutter
- Erem 2476 ESD ESD Safe Flush Side cutter
- Erem 576 ESD ESD Safe Flush Side cutter
- Erem 577 ESD ESD Safe Flush Side cutter
- Erem 676 ESD Flush ESD Safe Side Cutter