Erem 504 ESD Flush ESD Safe Tip Cutter
- N° de stock RS:
- 240-0732
- Numéro d'article Distrelec:
- 180-99-206
- Référence fabricant:
- 504AE
- Fabricant:
- Erem
Sous-total (1 unité)*
107,06 €
(TVA exclue)
129,54 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- 3 unité(s) expédiée(s) à partir du 25 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 107,06 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 240-0732
- Numéro d'article Distrelec:
- 180-99-206
- Référence fabricant:
- 504AE
- Fabricant:
- Erem
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Erem | |
| Product Type | Tip Cutter | |
| Sub Type | Tip Cutter | |
| Jaw Width | 11mm | |
| Overall Length | 4.3in | |
| Jaw Length | 20mm | |
| VDE/1000V Approved | No | |
| Application | Microelectronic | |
| Height Safe | Yes | |
| ESD Safe | Yes | |
| Jaw Material | High Grade Tool Steel | |
| Standards/Approvals | UPC | |
| Maximum Cutting Capacity | 1.29mm | |
| Cut Type | Flush | |
| Sélectionner tout | ||
|---|---|---|
Marque Erem | ||
Product Type Tip Cutter | ||
Sub Type Tip Cutter | ||
Jaw Width 11mm | ||
Overall Length 4.3in | ||
Jaw Length 20mm | ||
VDE/1000V Approved No | ||
Application Microelectronic | ||
Height Safe Yes | ||
ESD Safe Yes | ||
Jaw Material High Grade Tool Steel | ||
Standards/Approvals UPC | ||
Maximum Cutting Capacity 1.29mm | ||
Cut Type Flush | ||
- Pays d'origine :
- CH
Weller Tip Cutter, 20mm Jaw Length, 1.29mm Maximum Cutting Capacity - 504AE
This tip cutter is designed for precision trimming of component leads in microelectronic work. It provides a compact cutting solution for users requiring careful, controlled flush cuts during assembly and repair tasks. The tool is built for routine workshop and bench use where electrostatic-sensitive handling and fine removal of protruding material are necessary.
Features and Benefits:
• ESD-safe construction reduces the risk of electrostatic discharge during handling
• Flush-cutting geometry produces near-surface trims for neat finishes
• Maximum cutting capacity 1.29mm handles most small leads
• High-grade tool steel jaws maintain edge retention under repeated use
• Compact 11mm jaw width enables access in confined areas
• Flush-cutting geometry produces near-surface trims for neat finishes
• Maximum cutting capacity 1.29mm handles most small leads
• High-grade tool steel jaws maintain edge retention under repeated use
• Compact 11mm jaw width enables access in confined areas
Applications
• Suitable for trimming component leads on densely populated boards
• Ideal for laboratory and bench-level microelectronic assembly
• Used with small through-hole components requiring a flush finish
• Can be used for detail work in precision repair operations
• Ideal for laboratory and bench-level microelectronic assembly
• Used with small through-hole components requiring a flush finish
• Can be used for detail work in precision repair operations
Is the tool safe for use with electrostatic-sensitive devices?
Yes, the construction prevents static build-up, enabling safe manipulation of sensitive components during cutting operations.
What material are the cutting surfaces made from and why does it matter?
The blades are manufactured from high-grade tool steel which offers enhanced hardness and wear resistance for sustained cutting performance.
How does the cutter cope with tight access points?
The relatively narrow jaw width combined with a compact overall form allows entry into restricted spaces for targeted trimming.
What standards or approvals accompany this tool?
It carries UPC approval, indicating conformity with the specified certification requirements.