Knipex Knipex 20 mm Twin Cutting Edge Cable Cutter
- N° de stock RS:
- 238-6990
- Numéro d'article Distrelec:
- 302-23-035
- Référence fabricant:
- 95 12 200
- Fabricant:
- Knipex
Sous-total (1 unité)*
71,78 €
(TVA exclue)
86,85 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 30 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 71,78 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 238-6990
- Numéro d'article Distrelec:
- 302-23-035
- Référence fabricant:
- 95 12 200
- Fabricant:
- Knipex
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Knipex | |
| Product Type | Cable Cutter | |
| Sub Type | One-Hand Operation with Twin Cutting Edge | |
| Non-Sparking | No | |
| Overall Length | 200mm | |
| VDE/1000V Approved | No | |
| Application | Cutting | |
| Height Safe | No | |
| Jaw Material | Tool Steel | |
| ESD Safe | No | |
| Handle Material | Steel | |
| Grip Material | Multi Component Grip | |
| Material Cut | Aluminium Wire, Copper Wire | |
| Standards/Approvals | DIN ISO 5745, ASME B107.20, DIN EN 60900, IEC 60900, DIN ISO 5746 | |
| Maximum Cutting Capacity | 20mm | |
| Cut Type | Twin Cutting Edge | |
| Sélectionner tout | ||
|---|---|---|
Marque Knipex | ||
Product Type Cable Cutter | ||
Sub Type One-Hand Operation with Twin Cutting Edge | ||
Non-Sparking No | ||
Overall Length 200mm | ||
VDE/1000V Approved No | ||
Application Cutting | ||
Height Safe No | ||
Jaw Material Tool Steel | ||
ESD Safe No | ||
Handle Material Steel | ||
Grip Material Multi Component Grip | ||
Material Cut Aluminium Wire, Copper Wire | ||
Standards/Approvals DIN ISO 5745, ASME B107.20, DIN EN 60900, IEC 60900, DIN ISO 5746 | ||
Maximum Cutting Capacity 20mm | ||
Cut Type Twin Cutting Edge | ||
Statut RoHS : Exempté
- Pays d'origine :
- DE
KNIPEX 95 12 200 Cable Shears with twin cutting edge with comfort handles burnished 200 mm
95 12 200 Cable Shears clean and smooth cut without crushing and deformation. by dividing the cutting actions into initial cut (insulating sheath in the front cutting area) and final cut (conductor in the back cutting area), cables up to Ø 20 mm can be cut in one-hand operation. Pinch guard prevents operators' fingers being pinched. For cutting copper and aluminium cables up to Ø 20 mm (70 mm²). Not suitable for steel wire and hard drawn copper conductors. Precision-ground, hardened blades. Low handforce required due to favourable lever ratio and special blade geometry. Adjustable bolted joint, self-retaining screw. With comfort handles MADE of three ergonomic components for optimised handling and with two KNIPEXtend interfaces for extensions. - Cutting capacity copper cable, multiple-stranded: 70mm²- Cutting capacity copper cable, multiple-stranded: Ø 20mm- AWG: 2 / 0
Features and Benefits
Clean And Smooth Cut Without Crushing And Deformation
By Dividing The Cutting Actions Into Initial Cut (Insulating Sheath In The Front Cutting Area) And Final Cut (Conductor In The Back Cutting Area), Cables Up To Ø 20 Mm Can Be Cut In One-Hand Operation
Pinch Guard Prevents Operators' Fingers Being Pinched
With Comfort Handles Made Of Three Ergonomic Components For Optimised Handling And With Two Knipextend Interfaces For Extensions
By Dividing The Cutting Actions Into Initial Cut (Insulating Sheath In The Front Cutting Area) And Final Cut (Conductor In The Back Cutting Area), Cables Up To Ø 20 Mm Can Be Cut In One-Hand Operation
Pinch Guard Prevents Operators' Fingers Being Pinched
With Comfort Handles Made Of Three Ergonomic Components For Optimised Handling And With Two Knipextend Interfaces For Extensions
Technical attributes
For Cutting Copper And Aluminium Cables Up To Ø 20 Mm (70 Mm²)
Not Suitable For Steel Wire And Hard Drawn Copper Conductors
Precision-Ground, Hardened Blades
Low Handforce Required Due To Favourable Lever Ratio And Special Blade Geometry
Adjustable Bolted Joint, Self-Retaining Screw
Not Suitable For Steel Wire And Hard Drawn Copper Conductors
Precision-Ground, Hardened Blades
Low Handforce Required Due To Favourable Lever Ratio And Special Blade Geometry
Adjustable Bolted Joint, Self-Retaining Screw
Liens connexes
- Knipex Knipex 20 mm Twin Cutting Edge Cable Cutter
- Knipex Knipex 15 mm Twin Cutting Edge Cable Cutter
- Knipex Knipex VDE/1000V Approved 15 mm Twin Cutting Edge Cable Cutter
- Knipex Knipex 27 mm Cable Cutter
- Knipex Knipex 12 mm Flush Cable Cutter
- Knipex Knipex 15 mm Flush Cable Cutter
- Knipex Spare Cutting Head Spare Knife for use with Cable Cutter 95 71 445
- Knipex Spare Cutting Head Spare Knife for use with Cable Cutter 95 81 600
