Knipex Knipex With Bevel Cutter
- N° de stock RS:
- 238-6966
- Référence fabricant:
- 71 82 950
- Fabricant:
- Knipex
Sous-total (1 unité)*
193,82 €
(TVA exclue)
234,52 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 80,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 28 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 193,82 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 238-6966
- Référence fabricant:
- 71 82 950
- Fabricant:
- Knipex
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Knipex | |
| Product Type | Cutter | |
| Sub Type | Mesh Cutting | |
| Non-Sparking | No | |
| Overall Length | 950mm | |
| VDE/1000V Approved | No | |
| Application | Concrete Mesh Cutter | |
| Height Safe | No | |
| ESD Safe | No | |
| Jaw Material | Chrome Vanadium Steel | |
| Material Cut | Hard Wire, Medium Wire, Soft Wire | |
| Handle Material | Powder Coated Steel Tube | |
| Grip Material | Multi Component Grip | |
| Maximum Cutting Capacity | 11mm | |
| Standards/Approvals | DIN EN 60900, IEC 60900, DIN ISO 5746 | |
| Cut Type | With Bevel | |
| Sélectionner tout | ||
|---|---|---|
Marque Knipex | ||
Product Type Cutter | ||
Sub Type Mesh Cutting | ||
Non-Sparking No | ||
Overall Length 950mm | ||
VDE/1000V Approved No | ||
Application Concrete Mesh Cutter | ||
Height Safe No | ||
ESD Safe No | ||
Jaw Material Chrome Vanadium Steel | ||
Material Cut Hard Wire, Medium Wire, Soft Wire | ||
Handle Material Powder Coated Steel Tube | ||
Grip Material Multi Component Grip | ||
Maximum Cutting Capacity 11mm | ||
Standards/Approvals DIN EN 60900, IEC 60900, DIN ISO 5746 | ||
Cut Type With Bevel | ||
Statut RoHS : Exempté
- Pays d'origine :
- DE
KNIPEX High Performance Lattice Cutter 950mm
The Knipex lattice cutter offers high cutting performance with minimum effort thanks to the optimal coordination of cutting edge angle and transmission ratio.
It is 950 mm long.
Features / Benefits :
KNIPEX - 71 82 950 - KNIPEX High-Performance Cutter - 950mm
Cutting power with a maximum hardness of 48 HRC
Induction hardened cutting edges, Forged stop with comfortable shock absorber
Easy access due to very flat head/hinge area
Ergonomically designed angled handles for less tiring work
Robust, two-coloured handles with good grip
Precise adjustment (12 positions) by means of eccentric screws
High cutting power and low physical effort due to perfect adjustment of cutting angle and gear ratio - Screw-on cutting head, exchangeable
Hinge : special tool steel, forged
Arm: tubular steel, powder coated
Jaws: high performance chrome vanadium steel, forged, oil hardened in several stages.
Liens connexes
- Knipex Knipex With Bevel End Cutting Nipper
- Knipex Spare Cutting Head Spare Knife for use with Bolt Cutter High Performance 71 82 950
- Knipex Super Knips® With Bevel End Cutting Nipper
- Knipex Knipex Bevel End Cutting Nipper
- Knipex Knipex With Bevel ESD Safe End Cutting Nipper
- Knipex Knipex Without Bevel End Cutting Nipper
- Knipex Knipex Small Bevel End Cutting Nipper
- Knipex Super Knips® With Bevel ESD Safe End Cutting Nipper