Knipex 35 42 Bevel Long Nose Plier
- N° de stock RS:
- 238-6961
- Numéro d'article Distrelec:
- 180-57-928
- Référence fabricant:
- 35 42 115
- Fabricant:
- Knipex
Sous-total (1 unité)*
47,07 €
(TVA exclue)
56,95 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 2 unité(s) prête(s) à être expédiée(s)
- Plus 8 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 10 unité(s) expédiée(s) à partir du 19 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 47,07 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 238-6961
- Numéro d'article Distrelec:
- 180-57-928
- Référence fabricant:
- 35 42 115
- Fabricant:
- Knipex
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Knipex | |
| Product Type | Long Nose Plier | |
| Sub Type | Precision Diagonal Cutter | |
| Non-Sparking | No | |
| Jaw Width | 8mm | |
| Overall Length | 115mm | |
| Jaw Length | 22.5mm | |
| VDE/1000V Approved | No | |
| Application | Electronic, Precision Cutting, Small Component, Diagonal Cutter | |
| Height Safe | No | |
| ESD Safe | No | |
| Jaw Material | Ball Bearing Chrome Steel | |
| Grip Material | Multi Component Plastic | |
| Handle Material | Forged Steel | |
| Maximum Cutting Capacity | 3.8mm | |
| Standards/Approvals | ASME B107.20, IEC 60900, DIN EN 60900, VDE-Tested, DIN ISO 5745, DIN ISO 5746 | |
| Cut Type | Bevel | |
| Sélectionner tout | ||
|---|---|---|
Marque Knipex | ||
Product Type Long Nose Plier | ||
Sub Type Precision Diagonal Cutter | ||
Non-Sparking No | ||
Jaw Width 8mm | ||
Overall Length 115mm | ||
Jaw Length 22.5mm | ||
VDE/1000V Approved No | ||
Application Electronic, Precision Cutting, Small Component, Diagonal Cutter | ||
Height Safe No | ||
ESD Safe No | ||
Jaw Material Ball Bearing Chrome Steel | ||
Grip Material Multi Component Plastic | ||
Handle Material Forged Steel | ||
Maximum Cutting Capacity 3.8mm | ||
Standards/Approvals ASME B107.20, IEC 60900, DIN EN 60900, VDE-Tested, DIN ISO 5745, DIN ISO 5746 | ||
Cut Type Bevel | ||
Statut RoHS : Exempté
- Pays d'origine :
- DE
Pliers - 45° flat smooth tips - 115mm
The Knipex electronics plier has narrow sleeves pulled up to the head of the plier enable the tool to be guided securely and comfortably, also between thumb and index finger. It has Smooth ground gripping surfaces. It has 115 mm length. The polishing or mirror polishing (only finish 2) in combination with the thin oil layer offers good protection against rust, thus avoiding disturbances in electronic circuits caused by flaking chrome particles.
Features and Benefits
Bi-material sheathing
Precision pliers for high-precision assembly work, e.g. in the fields of electronics and precision mechanics - For gripping, holding and bending
Precision hinge with a gap between the jaws
Smooth inside of the jaws
Carefully deburred edges;Chrome plated steel for ball bearings
Standards
DIN ISO 9655
Liens connexes
- Knipex 35 42 Long Nose Pliers Flat 22,5mm Jaw
- Knipex 35 42 1-Piece Long Nose Plier 22.5mm Jaw ESD Safe
- Knipex 35 21 1-Piece Long Nose Plier 22.5mm Jaw
- Knipex 35 32 1-Piece Long Nose Plier 22.5mm Jaw
- Knipex 35 22 1-Piece Long Nose Plier 22.5mm Jaw
- Knipex 35 32 1-Piece Long Nose Plier 22.5mm Jaw ESD Safe
- Knipex 35 82 1-Piece Long Nose Plier 35mm Jaw
- Knipex 35 22 1-Piece Long Nose Plier Round 22.5mm Jaw ESD Safe