Weller Erem Super Full Flush ESD Safe Side Cutter
- N° de stock RS:
- 182-357
- Numéro d'article Distrelec:
- 180-51-245
- Référence fabricant:
- 2432E
- Fabricant:
- Weller Erem
Sous-total (1 unité)*
85,49 €
(TVA exclue)
103,44 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 4 unité(s) prête(s) à être expédiée(s)
- Plus 23 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 8 unité(s) expédiée(s) à partir du 04 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 85,49 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 182-357
- Numéro d'article Distrelec:
- 180-51-245
- Référence fabricant:
- 2432E
- Fabricant:
- Weller Erem
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Weller Erem | |
| Product Type | Side cutter | |
| Sub Type | Side Cutter | |
| Overall Length | 130mm | |
| Jaw Width | 11mm | |
| Jaw Length | 12mm | |
| VDE/1000V Approved | No | |
| Application | Electronic | |
| Jaw Material | Steel | |
| ESD Safe | Yes | |
| Maximum Cutting Capacity | 1.6mm | |
| Standards/Approvals | RoHS | |
| Cut Type | Super Full Flush | |
| Sélectionner tout | ||
|---|---|---|
Marque Weller Erem | ||
Product Type Side cutter | ||
Sub Type Side Cutter | ||
Overall Length 130mm | ||
Jaw Width 11mm | ||
Jaw Length 12mm | ||
VDE/1000V Approved No | ||
Application Electronic | ||
Jaw Material Steel | ||
ESD Safe Yes | ||
Maximum Cutting Capacity 1.6mm | ||
Standards/Approvals RoHS | ||
Cut Type Super Full Flush | ||
Statut RoHS : Exempté
- Pays d'origine :
- CH
Erem 2432E Oval Head Side Cutters
The 2432E angled tipped cutters from Erem by Weller provide precise cuts at a number of angles with a super full flush finish. The ergonomic handles allow for reduced fatigue in hands when working over long periods. Made from tough and durable tool steel that makes it suitable for working on electronic boards, component connections due to the ESD protection. The 45° cutting angle coupled with a maximum cutting capacity of 1.2 mm for copper wire and 0.6 for medium hardness wire
Features and Benefits
• Protection of electronic components from risks of electrostatic discharge (ESD)
• ESD compliant for safe use on sensitive electronic components
• Spring return system reduces effort and strain
• Angled Narrow Head Cutters
• Overall length: 130mm
• Cuts copper and Nickel wires Ø: 0.1 – 1.6mm
• Weight: 70g
Typical Applications
Cutters are hand tools used to cut through wires and are available in a range of shapes and sizes to suit a variety of tasks and applications. The most common type of cutter head is oval, tapered and angled. The type of cut produced depends on the bevel of the cutter. Semi-flush cutters are more durable and produce a quick cut rough rougher edges, whereas an ultra-flush bevel will produce a much cleaner cut but is susceptible to damage. Cutters are commonly used in applications such as:
• DIY;• Industrial;• Construction;• Electronic Installation
Care and maintenance
Do not force cutters to cut through material that is too hard for them as it can damage the blades by chipping or blunting them. These hand tools can be cleaned with soap and water, especially the blades, to remove dirt which could cause issues with the joints and encourage corrosion.
FAQ's
What material is this cutter suitable with?
This cutter is suitable to cut copper wires 0.1 to 1.6 mm.
What is the bevel of this cutter?
The 2432E provides a super full flush cut at 45°.