LEM HLSR Series Current Transformer, 25A Input, 25:1, 10 A Output, 4.5 → 5.5 V
- N° de stock RS:
- 793-4584
- Numéro d'article Distrelec:
- 301-86-169
- Référence fabricant:
- HLSR 10-P
- Fabricant:
- LEM
Sous-total (1 unité)*
9,11 €
(TVA exclue)
11,02 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Dernier stock RS
- 1 restante(s), prêt à être expédié
- Plus 367 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Unité | Prix par unité |
|---|---|
| 1 + | 9,11 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 793-4584
- Numéro d'article Distrelec:
- 301-86-169
- Référence fabricant:
- HLSR 10-P
- Fabricant:
- LEM
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | LEM | |
| Current Ratio | 25:1 | |
| Series | HLSR | |
| Sensor Technology | Open Loop | |
| Supply Voltage | 4.5 → 5.5 V | |
| Input Current | 25A | |
| Output Current | 10 A | |
| Overall Height | 12mm | |
| Overall Width | 17.2mm | |
| Overall Depth | 70mm | |
| Minimum Temperature | -40°C | |
| Maximum Temperature | +105°C | |
| Mounting Type | PCB Mount | |
| Sélectionner tout | ||
|---|---|---|
Marque LEM | ||
Current Ratio 25:1 | ||
Series HLSR | ||
Sensor Technology Open Loop | ||
Supply Voltage 4.5 → 5.5 V | ||
Input Current 25A | ||
Output Current 10 A | ||
Overall Height 12mm | ||
Overall Width 17.2mm | ||
Overall Depth 70mm | ||
Minimum Temperature -40°C | ||
Maximum Temperature +105°C | ||
Mounting Type PCB Mount | ||
HLSR Series
A wide range of open loop current transducers for the electronic measurement of current dc, ac, pulsed... with galvanic separation between the primary and the secondary circuit.
Low power consumption
Voltage output
Compact design for through-hole PCB mounting
Factory calibrated
Single supply + 5 V
Low foot-print
Low offset drift
Suitable for industrial applications
Voltage output
Compact design for through-hole PCB mounting
Factory calibrated
Single supply + 5 V
Low foot-print
Low offset drift
Suitable for industrial applications
Liens connexes
- LEM HLSR Series Current Transformer 125:1 4.5 → 5.5 V
- LEM HLSR 32-P, Current Sensor
- LEM HLSR 20-P, Current Sensor
- LEM HO Series Current Transformer 25:1 8 x 8mm Bore, 4.5 → 5.5 V
- LEM HLSR Series ASIC Open Loop Hall Effect Current Transducer 15 V
- LEM HO Series Current Transformer 25:1 4.5 → 5.5 V
- LEM HO Series Current Transformer 25:1 4.5 → 5.5 V
- LEM HO Series Current Transformer 450:1 15 x 8mm Bore, 4.5 → 5.5 V
