LEM AHR Series Current Sensor 1 kA 20V dc, 50 V dc
- N° de stock RS:
- 283-8012
- Numéro d'article Distrelec:
- 176-96-373
- Référence fabricant:
- AHR 1000 B10
- Fabricant:
- LEM
Sous-total (1 unité)*
362,27 €
(TVA exclue)
438,35 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité |
|---|---|
| 1 + | 362,27 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 283-8012
- Numéro d'article Distrelec:
- 176-96-373
- Référence fabricant:
- AHR 1000 B10
- Fabricant:
- LEM
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | LEM | |
| Product Type | Current Sensor | |
| Series | AHR | |
| Minimum Operating Temperature | -40°C | |
| Primary Current | 1kA | |
| Maximum Operating Temperature | 70°C | |
| Weight | 47g | |
| Standards/Approvals | EN64000-6-2, EN61010-1, EN61000-6-4 | |
| Width | 44mm | |
| Mount Type | Panel | |
| Maximum Operating Frequency | 6kHz | |
| Supply Voltage | 20, 50V dc | |
| Minimum Operating Frequency | 50Hz | |
| Sélectionner tout | ||
|---|---|---|
Marque LEM | ||
Product Type Current Sensor | ||
Series AHR | ||
Minimum Operating Temperature -40°C | ||
Primary Current 1kA | ||
Maximum Operating Temperature 70°C | ||
Weight 47g | ||
Standards/Approvals EN64000-6-2, EN61010-1, EN61000-6-4 | ||
Width 44mm | ||
Mount Type Panel | ||
Maximum Operating Frequency 6kHz | ||
Supply Voltage 20, 50V dc | ||
Minimum Operating Frequency 50Hz | ||
- Pays d'origine :
- CN
The AC/DC Current transducer is a reliable electronic measurement device designed for DC & distorted AC waveform currents. With galvanic isolation between the primary and secondary circuits, it ensures accurate True RMS 0-10 V voltage output for monitoring purposes.
Primary AC current range of 500-2000A
True RMS output for precise measurements
Bus bar or panel mounting for versatile installation options
Isolated plastic case with UL94-V0 recognition for safety
High isolation between primary and secondary circuits to prevent insertion loss
Low current consumption of 35mA for efficiency
Accurate measurement of output current for various applications
Liens connexes
- LEM AHR Series Current Transducer 2 kA 20V, 50 V
- LEM AHR Series Current Transformer 2000 A 20V dc, 50 V dc
- LEM AHR Series Current Transducer 800 A 20V, 50 V
- LEM AHR 500 B10, Current Sensor
- LEM AHR 1000 B420, Current Sensor
- LEM DK-B10 Series Current Transformer 200 A 20V dc, 50 V dc 21.7 mm Bore
- LEM AHR 1500 B420, Current Sensor
- LEM DK-B10 Series Current Transformer 300 A 22 V ac 20V dc, 50 V dc 21.7 mm Bore