Infineon TLE49421CHAMA2, Hall Effect Sensor IC 2-Pin, PG-SSO-2-4
- N° de stock RS:
- 258-4098
- Référence fabricant:
- TLE49421CHAMA2
- Fabricant:
- Infineon
Offre groupée disponible
Sous-total (1 unité)*
2,00 €
(TVA exclue)
2,42 €
(TVA incluse)
Ajouter 47 unités pour bénéficier d'une livraison gratuite
En stock
- Plus 1 285 unité(s) expédiée(s) à partir du 16 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 9 | 2,00 € |
| 10 - 99 | 1,60 € |
| 100 - 249 | 1,30 € |
| 250 - 499 | 1,14 € |
| 500 + | 1,12 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 258-4098
- Référence fabricant:
- TLE49421CHAMA2
- Fabricant:
- Infineon
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Infineon | |
| Product Type | Hall Effect Sensor IC | |
| Quiescent Current | 7mA | |
| Package Type | PG-SSO-2-4 | |
| Bandwidth | 5kHz | |
| Current Rating | 16.8 mA | |
| Pin Count | 2 | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 20V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Series | TLE4942 | |
| Length | 5.34mm | |
| Width | 1 mm | |
| Standards/Approvals | RoHS | |
| Height | 3.71mm | |
| Automotive Standard | AEC-Q100 | |
| Sélectionner tout | ||
|---|---|---|
Marque Infineon | ||
Product Type Hall Effect Sensor IC | ||
Quiescent Current 7mA | ||
Package Type PG-SSO-2-4 | ||
Bandwidth 5kHz | ||
Current Rating 16.8 mA | ||
Pin Count 2 | ||
Mount Type Surface | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 20V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Series TLE4942 | ||
Length 5.34mm | ||
Width 1 mm | ||
Standards/Approvals RoHS | ||
Height 3.71mm | ||
Automotive Standard AEC-Q100 | ||
The Infineon hall effect sensor IC is designed to provide information about rotational speed, direction of rotation, assembly position and limit air gap to modern vehicle dynamics control systems and ABS. The output has been designed as a two wire current interface based on a pulse width modulation principle. The sensor operates without external components and combines a fast power-up time with a low cut-off frequency. Excellent accuracy and sensitivity is specified for harsh automotive requirements as a wide temperature range, high ESD robustness and high EMC resilience.
Two-wire PWM current interface
Detection of rotation direction
Air gap diagnosis
Assembly position diagnosis
Dynamic self-calibration principle
Single chip solution
No external components needed
High sensitivity
South and north pole pre-induction possible
High resistance to piezo effects
Liens connexes
- Infineon PG-SSO-2-4
- Infineon PG-SSO-2-53
- Infineon TLE4941CHAMA2 PG-SSO-2-4
- Infineon TLE4941PLUSCXAMA1 PG-SSO-2-53
- Infineon Surface Hall Effect Sensor Latch 3 V 32 V 3-Pin
- Infineon PG-SSO-4-1
- Infineon Surface Hall Effect Sensor Latch 4.5 V 5.5 V 3-Pin
- Infineon Surface Hall Effect Sensor Latch 3 V 32 V 3-Pin