MPS MCS1800GS-12-P, Hall Effect Sensor IC 8-Pin, SOIC-8
- N° de stock RS:
- 337-954P
- Référence fabricant:
- MCS1800GS-12-P
- Fabricant:
- MPS
Offre groupée disponible
Consulter les options de prix de grosSous-total 50 unités (conditionné en bande continue)*
132,80 €
(TVA exclue)
160,70 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- 490 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 50 - 95 | 2,656 € |
| 100 + | 2,464 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 337-954P
- Référence fabricant:
- MCS1800GS-12-P
- Fabricant:
- MPS
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | MPS | |
| Offset Voltage | ±10 mV | |
| Product Type | Hall Effect Sensor IC | |
| Package Type | SOIC-8 | |
| Bandwidth | 100kHz | |
| Current Rating | 12.5A | |
| Pin Count | 8 | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 0.1V | |
| Maximum Supply Voltage | 6V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Height | 1.75mm | |
| Width | 4.8mm | |
| Standards/Approvals | RoHS | |
| Length | 6.2mm | |
| Series | MCS1800 | |
| Sélectionner tout | ||
|---|---|---|
Marque MPS | ||
Offset Voltage ±10 mV | ||
Product Type Hall Effect Sensor IC | ||
Package Type SOIC-8 | ||
Bandwidth 100kHz | ||
Current Rating 12.5A | ||
Pin Count 8 | ||
Mount Type Surface | ||
Minimum Supply Voltage 0.1V | ||
Maximum Supply Voltage 6V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Height 1.75mm | ||
Width 4.8mm | ||
Standards/Approvals RoHS | ||
Length 6.2mm | ||
Series MCS1800 | ||
- Pays d'origine :
- CN
The MPS International Ltd Linear Hall effect current sensor for AC or DC current sensing. The Hall array is differential, which cancels out any stray magnetic field. A primary conductor with a low resistance allows current to flow close to the IC, which contains high accuracy Hall effect sensors. This current generates a magnetic field that is sensed at two different points by the integrated Hall effect transducers. The magnetic field difference between these two points is then converted into a voltage that is proportional to the applied current.
4μs output rising time
Ratiometric output from supply voltage
Output proportional to AC or DC currents
Factory trimmed for accuracy
No magnetic hysteresis