Texas Instruments Open Drain Current Monitor Single 16-Pin VQFN
- N° de stock RS:
- 817-6619P
- Référence fabricant:
- INA3221AIRGVT
- Fabricant:
- Texas Instruments
Actuellement indisponible
Désolés, nous ne savons pas quand ce produit sera réapprovisionné.
- N° de stock RS:
- 817-6619P
- Référence fabricant:
- INA3221AIRGVT
- Fabricant:
- Texas Instruments
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Texas Instruments | |
| Power Supply Type | Single | |
| Product Type | Current Monitor | |
| Minimum Supply Voltage | 2.7V | |
| Maximum Supply Voltage | 5.5V | |
| CMRR - Common Mode Rejection Ratio | 110dB | |
| Number of Channels | 1 | |
| Supply Current | 450μA | |
| Mount Type | Surface | |
| Package Type | VQFN | |
| Pin Count | 16 | |
| Minimum Operating Temperature | -40°C | |
| Length | 4.15mm | |
| Width | 4.15 mm | |
| Height | 0.95mm | |
| Series | INA3221 | |
| Standards/Approvals | No | |
| Maximum Operating Temperature | 125°C | |
| Output Type | Open Drain | |
| Automotive Standard | AEC-Q100 | |
| Sélectionner tout | ||
|---|---|---|
Marque Texas Instruments | ||
Power Supply Type Single | ||
Product Type Current Monitor | ||
Minimum Supply Voltage 2.7V | ||
Maximum Supply Voltage 5.5V | ||
CMRR - Common Mode Rejection Ratio 110dB | ||
Number of Channels 1 | ||
Supply Current 450μA | ||
Mount Type Surface | ||
Package Type VQFN | ||
Pin Count 16 | ||
Minimum Operating Temperature -40°C | ||
Length 4.15mm | ||
Width 4.15 mm | ||
Height 0.95mm | ||
Series INA3221 | ||
Standards/Approvals No | ||
Maximum Operating Temperature 125°C | ||
Output Type Open Drain | ||
Automotive Standard AEC-Q100 | ||
Current Sense Power / Current Monitors, Texas Instruments
Current and power measurement for real-time system protection, feedback control and high-accuracy system monitoring.
Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low Value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.