MAX4080TAUA+ Maxim Integrated Rail to Rail Current Sensing Amplifier Single 8-Pin μMAX
- N° de stock RS:
- 190-1271P
- Référence fabricant:
- MAX4080TAUA+
- Fabricant:
- Maxim Integrated
Offre groupée disponible
Sous-total 10 unités (conditionné en tube)*
30,36 €
(TVA exclue)
36,74 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En voie de retrait du marché
- 15 dernière(s) unité(s), prête(s) à l'envoi d'un autre centre de distribution
Unité | Prix par unité |
|---|---|
| 10 - 20 | 3,036 € |
| 25 - 95 | 2,866 € |
| 100 - 245 | 2,456 € |
| 250 + | 2,398 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 190-1271P
- Référence fabricant:
- MAX4080TAUA+
- Fabricant:
- Maxim Integrated
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Maxim Integrated | |
| Power Supply Type | Single | |
| Product Type | Current Sensing Amplifier | |
| Maximum Supply Voltage | 76V | |
| Minimum Supply Voltage | 4.5V | |
| CMRR - Common Mode Rejection Ratio | 100dB | |
| Number of Channels | 1 | |
| Supply Current | 0.19mA | |
| Mount Type | Surface | |
| Package Type | μMAX | |
| Pin Count | 8 | |
| GBP - Gain Bandwidth Product | 250kHz | |
| Minimum Operating Temperature | -40°C | |
| Height | 0.95mm | |
| Series | MAX4080 | |
| Width | 3.1 mm | |
| Standards/Approvals | No | |
| Length | 3.1mm | |
| Maximum Operating Temperature | 125°C | |
| Automotive Standard | No | |
| Output Type | Rail to Rail | |
| Sélectionner tout | ||
|---|---|---|
Marque Maxim Integrated | ||
Power Supply Type Single | ||
Product Type Current Sensing Amplifier | ||
Maximum Supply Voltage 76V | ||
Minimum Supply Voltage 4.5V | ||
CMRR - Common Mode Rejection Ratio 100dB | ||
Number of Channels 1 | ||
Supply Current 0.19mA | ||
Mount Type Surface | ||
Package Type μMAX | ||
Pin Count 8 | ||
GBP - Gain Bandwidth Product 250kHz | ||
Minimum Operating Temperature -40°C | ||
Height 0.95mm | ||
Series MAX4080 | ||
Width 3.1 mm | ||
Standards/Approvals No | ||
Length 3.1mm | ||
Maximum Operating Temperature 125°C | ||
Automotive Standard No | ||
Output Type Rail to Rail | ||
Current Sensing Amplifiers, Maxim Integrated
Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.
Note
Please note that any defect or non – conformance of this product must be discovered and reported to RS within 20 days of purchase.