onsemi Rail to Rail Current Sensing Amplifier Single 6-Pin SC-70
- N° de stock RS:
- 178-4554P
- Référence fabricant:
- NCS199A1RSQT2G
- Fabricant:
- onsemi
Offre groupée disponible
Sous-total 500 unités (conditionné en bobine)*
216,00 €
(TVA exclue)
261,50 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 1 350 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 500 - 950 | 0,432 € |
| 1000 + | 0,374 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 178-4554P
- Référence fabricant:
- NCS199A1RSQT2G
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Power Supply Type | Single | |
| Product Type | Current Sensing Amplifier | |
| Minimum Supply Voltage | 2.2V | |
| Maximum Supply Voltage | 26V | |
| CMRR - Common Mode Rejection Ratio | 100dB | |
| Number of Channels | 1 | |
| Supply Current | 80μA | |
| Mount Type | Surface | |
| Package Type | SC-70 | |
| Pin Count | 6 | |
| GBP - Gain Bandwidth Product | 90kHz | |
| Minimum Operating Temperature | -40°C | |
| Height | 1mm | |
| Standards/Approvals | No | |
| Series | NCS199 | |
| Length | 2.2mm | |
| Output Type | Rail to Rail | |
| Automotive Standard | No | |
| Maximum Operating Temperature | 125°C | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Power Supply Type Single | ||
Product Type Current Sensing Amplifier | ||
Minimum Supply Voltage 2.2V | ||
Maximum Supply Voltage 26V | ||
CMRR - Common Mode Rejection Ratio 100dB | ||
Number of Channels 1 | ||
Supply Current 80μA | ||
Mount Type Surface | ||
Package Type SC-70 | ||
Pin Count 6 | ||
GBP - Gain Bandwidth Product 90kHz | ||
Minimum Operating Temperature -40°C | ||
Height 1mm | ||
Standards/Approvals No | ||
Series NCS199 | ||
Length 2.2mm | ||
Output Type Rail to Rail | ||
Automotive Standard No | ||
Maximum Operating Temperature 125°C | ||
- Pays d'origine :
- MY
The NCS199A1R is a voltage output current shunt monitor (also called current sense amplifier) which can measure voltage across shunts at common-mode voltages from -0.3 to 26V, independent of supply voltage. The low offset of the zero-drift architecture enables current sensing across the shunt with maximum voltage drop as low as 10 mV full-scale.
High-side current sensing for high voltage systems
Low Ohm value current sense resistors
High accuracy over temperature leading to better power efficiency
Wide supply voltage range provides system flexibilty
Liens connexes
- onsemi Rail to Rail Current Sensing Amplifier Single 6-Pin SC-70
- NCS199A1RSQT2G onsemi Rail to Rail Current Sensing Amplifier Single 6-Pin SC-70
- NCS199A2RSQT2G onsemi Rail to Rail Current Sensing Amplifier Single 6-Pin SC-70
- NCV214RSQT2G onsemi Rail to Rail Current Sensing Amplifier Single 6-Pin SC-70
- NCS213RSQT2G onsemi Rail to Rail Current Sensing Amplifier Single 6-Pin SC-70
- NCV210RSQT2G onsemi Rail to Rail Current Sensing Amplifier Single 6-Pin SC-70
- NCS210RSQT2G onsemi Rail to Rail Current Sensing Amplifier Single 6-Pin SC-70
- NCS214RSQT2G onsemi Rail to Rail Current Sensing Amplifier Single 6-Pin SC-70