XTR300AIRGWT Texas Instruments, ±20 mA Current Loop Transmitter 20-Pin QFN
- N° de stock RS:
- 661-2432P
- Référence fabricant:
- XTR300AIRGWT
- Fabricant:
- Texas Instruments
Sous-total 1 unité (conditionné en bande continue)*
3,55 €
(TVA exclue)
4,30 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 238 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 3,55 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 661-2432P
- Référence fabricant:
- XTR300AIRGWT
- Fabricant:
- Texas Instruments
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Texas Instruments | |
| Output Current | ±20 mA | |
| Mounting Type | Surface Mount | |
| Package Type | QFN | |
| Pin Count | 20 | |
| Dimensions | 5 x 5 x 0.9mm | |
| Height | 0.9mm | |
| Length | 5mm | |
| Width | 5mm | |
| Maximum Operating Supply Voltage | ±22 V | |
| Minimum Operating Supply Voltage | ±5 V | |
| Maximum Operating Temperature | +125 °C | |
| Minimum Operating Temperature | -55 °C | |
| Sélectionner tout | ||
|---|---|---|
Marque Texas Instruments | ||
Output Current ±20 mA | ||
Mounting Type Surface Mount | ||
Package Type QFN | ||
Pin Count 20 | ||
Dimensions 5 x 5 x 0.9mm | ||
Height 0.9mm | ||
Length 5mm | ||
Width 5mm | ||
Maximum Operating Supply Voltage ±22 V | ||
Minimum Operating Supply Voltage ±5 V | ||
Maximum Operating Temperature +125 °C | ||
Minimum Operating Temperature -55 °C | ||
4mA-to-20mA Current-Loop, Texas Instruments
The Texas Instruments XTR300 is a complete output driver for industrial and process control applications. The output can be configured as current or voltage by the digital I/V select pin. No external shunt resistor is required. Only external gain-setting resistors and a loop compensation capacitor are required. The separate driver and receiver channels provide flexibility. The Instrumentation Amplifier (IA) can be used for remote voltage sense or as a high-voltage, high-impedance measurement channel. In voltage output mode, a copy of the output current is provided, allowing calculation of load resistance.
USER-SELECTABLE: Voltage or Current Output
+40V SUPPLY VOLTAGE
VOUT: ±10V (up to ±17.5V at ±20V supply)
IOUT: ±20mA (linear up to ±24mA)
SHORT- OR OPEN-CIRCUIT FAULT INDICATOR PIN
NO CURRENT SHUNT REQUIRED
OUTPUT DISABLE FOR SINGLE INPUT MODE
THERMAL PROTECTION
OVERCURRENT PROTECTION
SEPARATE DRIVER AND RECEIVER CHANNELS
DESIGNED FOR TESTABILITY
+40V SUPPLY VOLTAGE
VOUT: ±10V (up to ±17.5V at ±20V supply)
IOUT: ±20mA (linear up to ±24mA)
SHORT- OR OPEN-CIRCUIT FAULT INDICATOR PIN
NO CURRENT SHUNT REQUIRED
OUTPUT DISABLE FOR SINGLE INPUT MODE
THERMAL PROTECTION
OVERCURRENT PROTECTION
SEPARATE DRIVER AND RECEIVER CHANNELS
DESIGNED FOR TESTABILITY
4mA-to-20mA Current-Loop Communication
Current loop systems are used in electrically noisy industrial environments for sending analogue sensor data over long distances of 300m or more.
Liens connexes
- XTR300AIRGWT Texas Instruments, ±20 mA Current Loop Transmitter 20-Pin QFN
- XTR300AIRGWT Texas Instruments, ±20 mA Current Loop Transmitter 2MHz 20-Pin QFN
- XTR101AP Texas Instruments, 4 → 20 mA Current Loop Transmitter 14-Pin PDIP
- XTR110KU Texas Instruments, 4 → 20 mA Current Loop Transmitter 16-Pin SOIC
- XTR106UA Texas Instruments, 4 → 20 mA Current Loop Transmitter 14-Pin SOIC
- XTR110KP Texas Instruments, 4 → 20 mA Current Loop Transmitter 16-Pin PDIP
- XTR105UA Texas Instruments, 4 → 20 mA Current Loop Transmitter 14-Pin SOIC
- XTR115U Texas Instruments, 4 → 20 mA Current Loop Transmitter 8-Pin SOIC