RS PRO Crimp Tool Crimp Tool for BNC, TNC

Voir l’ensemble des Crimp Tools

Sous-total (1 unité)*

208,30 €

(TVA exclue)

252,04 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 6 unité(s) prête(s) à être expédiée(s)
  • Plus 29 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +208,30 €

*Prix donné à titre indicatif

N° de stock RS:
683-1623
Fabricant:
RS PRO
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

RS PRO

Product Type

Crimp Tool

Sub Type

Crimp Tool

For Use With

BNC, TNC

Height Safe

No

Overall Length

230mm

Standards/Approvals

RoHS

Pays d'origine :
SE

RS PRO Crimp Tool for BNC, TNC, N, Ethernet and Thinnet Connectors


The 683-1623 is an "Original line" hand crimp tool for BNC, TNC, N, Ethernet, Thinnet connectors. Producing 5.41 mm, 10.90 mm, 2.54 mm, 1.69 mm hexagon shaped crimps, with the minimum of effort, either right or left handed. Suitable for a wide range of cable types, see product data sheet for details. Suitable for wire types RG114A/U, RG115A/U, RG12A/U, RG133A/U, RG142B/U, RG144/U, RG165/U, RG166/U, RG1A/U, RG213/U, RG214/U, RG215/U, RG216/U, RG22/U, RG223/U, RG225/U, RG227/U, RG22B/U, RG26A/U, RG302/U, RG391/U, RG58C/U, RG63B/U, RG65A/U, RG79B/U

Features and Benefits:


Ergonomic non-slip main handle and low friction moving handle ensure a comfortable hand grip

Provides two-hand grip in the final phase of crimping, increasing comfort and productivity

Full cycle crimp mechanism to ensure consistent, reliable crimp

Ratchet release mechanism to clear mis-crimps and obstructions

Precision eccentric adjustment for consistent performance and ability to calibrate

Each tool has a unique serial number for traceability

Durable: life span exceeds 50000 cycles

High strength, through hardened alloy Swedish steel construction

Typical Applications

Crimping tools can be used for a variety of applications:-

• Maintenance & repair

• Electrical Installations

• Cable assemblies

FAQs:

What is the difference between un-insulated and insulated crimp tools?

Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How to maintain the product?

• To maintain a good function and long life: Axles and other movable parts should be regularly lubricated

• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to dirt or other contaminants

• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.

*Use a light mineral-free oil

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connecti

Liens connexes