Daniels Manufacturing M22520/2-01 Crimp Tool Frame Crimping Tool Frame for Crimp Contact

Voir l’ensemble des Crimp Tools

Sous-total (1 unité)*

1 006,10 €

(TVA exclue)

1 217,38 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 18 unité(s) prête(s) à être expédiée(s)
  • Plus 31 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +1 006,10 €

*Prix donné à titre indicatif

N° de stock RS:
314-7607
Référence fabricant:
AFM8
Fabricant:
Daniels Manufacturing
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Daniels Manufacturing

Product Type

Crimp Tool Frame

Sub Type

Crimping Tool Frame

For Use With

Crimp Contact

Series

M22520/2-01

Overall Length

161mm

Standards/Approvals

No

Statut RoHS : Exempté

Pays d'origine :
US

Manufacturer's Warranty


DMC AFM8 Miniature Adjustable Crimp Tool


A quality hand crimp tool for crimping circular connector contacts. This handy tool has a cycle controlled precision ratchet which prevents the tool being opened before the crimping action is completed. This feature ensures accurate and consistently high-quality crimps are achieved each time and prevents partial crimps. An 8 indent selector knob on the tool enables the correct crimp setting to be selected and a positioner guide locks the positioner firmly in place.

Features and Benefits


• Lightweight

• Wire size: 20 to 28 /20-32 AWG

• 8-step selector knob for crimp depth selection

• Ratchet mechanism ensures that a full crimp cycle is achieved

• Minimum maintenance required

• Interchangeable positioner compatible

Positioner


Positioners are not supplied with the tool and must be purchased separately. RS Stock no: 880-2277

Typical Applications:


• Maintenance & repair

• Electrical Installations

• Computer Interfacing

• Cable assemblies

FAQ:

How easy are they to use?

They are very easy to use, insert the contact pin into the hole of the crimp tool, load the wire into the contact pin, make sure it’s fully seated then and squeeze until the cycle finishes then finally check that you have a secure crimp.

How do you maintain the product?

• There is very little maintenance required for this tool, keep the indenter tips free of debris and dirt.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Liens connexes

Recently viewed