Knipex 97 Crimp Tool for Turned Contacts
- N° de stock RS:
- 267-7605
- Référence fabricant:
- 97 52 65 DG A
- Fabricant:
- Knipex
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 267-7605
- Référence fabricant:
- 97 52 65 DG A
- Fabricant:
- Knipex
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Knipex | |
| Product Type | Crimp Tool | |
| For Use With | Turned Contacts | |
| Handle Type | Comfort Grip | |
| Minimum Wire Size mm² | 0.14mm² | |
| Minimum Wire Size AWG | 26AWG | |
| Maximum Wire Size AWG | 10AWG | |
| Maximum Wire Size mm² | 6mm² | |
| Height Safe | No | |
| Series | 97 | |
| Overall Length | 250mm | |
| Adjustable Ratchet | Yes | |
| Standards/Approvals | REACH contains SVHC | |
| Sélectionner tout | ||
|---|---|---|
Marque Knipex | ||
Product Type Crimp Tool | ||
For Use With Turned Contacts | ||
Handle Type Comfort Grip | ||
Minimum Wire Size mm² 0.14mm² | ||
Minimum Wire Size AWG 26AWG | ||
Maximum Wire Size AWG 10AWG | ||
Maximum Wire Size mm² 6mm² | ||
Height Safe No | ||
Series 97 | ||
Overall Length 250mm | ||
Adjustable Ratchet Yes | ||
Standards/Approvals REACH contains SVHC | ||
Statut RoHS : Exempté
- Pays d'origine :
- DE
KNIPEX 97 52 65 DG A Four-Mandrel Crimping Pliers for turned contacts with multi-component handles chrome-plated 240 mm
97 52 65 DG A Four-Mandrel Crimping Pliers for turned contacts Basic pliers without locator for crimping turned pin and socket contacts from various contact manufacturers, for cable cross-sections from 0.14 to 6 mm². Crimp mandrel feed adjustable in increments of 0.01 mm and digitally readable
setting in mm, inch or comparable selector settings according to MIL standard. Electronic wear monitoring (patented) with warning function. Process-secure and consistently high crimp quality thanks to IEC 60352-compliant trigger lock (positive lock, can be unlocked). With recalibration function
check Basic setting using the enclosed test pin. Separately available locators enable the EXACT positioning of the crimp contacts. Pliers in a plastic case with foam insert. - Application: turned contacts (Harting
Ilme
Phoenix
Amphenol®
Walther
HTS
Contact
Weidmüller)- Capacity in square millimetres: 0.14 — 6mm²- AWG: 26 — 10- Number of crimp profiles: 1- Max. contact diameter: 7.5mm
Features and Benefits
Basic Pliers Without Locator For Crimping Turned Pin And Socket Contacts From Various Contact Manufacturers, For Cable Cross-Sections From 0.14 To 6 Mm²
Technical attributes
Crimp Mandrel Feed Adjustable In Increments Of 0.01 Mm And Digitally Readable
Setting In Mm, Inch Or Comparable Selector Settings According To Mil Standard
Electronic Wear Monitoring (Patented) With Warning Function
Process-Secure And Consistently High Crimp Quality Thanks To Iec 60352-Compliant Trigger Lock (Positive Lock, Can Be Unlocked)
With Recalibration Function
Setting In Mm, Inch Or Comparable Selector Settings According To Mil Standard
Electronic Wear Monitoring (Patented) With Warning Function
Process-Secure And Consistently High Crimp Quality Thanks To Iec 60352-Compliant Trigger Lock (Positive Lock, Can Be Unlocked)
With Recalibration Function
Liens connexes
- Knipex 97 Crimp Tool for Turned Contacts
- Knipex Crimp Tool for Turned Contacts
- Knipex 97 Crimp Tool for Bootlace Ferrule
- Knipex 97 Crimp Tool for Uninsulated Terminal
- Knipex 97 Crimp Tool for Insulated Terminals
- Knipex 97 Crimp Tool for Twin Bootlace Ferrule
- Knipex Knipex 97 5267 Crimp Tool Crimping Plier for DT Contacts
- Knipex 97 52 97 52 06 SB Crimp Tool for Uninsulated Open Barrel Terminals
