RS PRO Hand Ratcheting Crimp Tool for Insulated End Connectors, 1.25→6.0mm² Wire

Voir l’ensemble des Crimp Tools

Sous-total (1 unité)*

61,47 €

(TVA exclue)

74,38 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 3 unité(s) prête(s) à être expédiée(s)
  • Plus 109 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +61,47 €

*Prix donné à titre indicatif

N° de stock RS:
253-4583
Numéro d'article Distrelec:
304-04-610
Fabricant:
RS PRO
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

RS PRO

Wire Size AWG

22 → 10AWG

Wire Size mm²

1.25→6.0mm²

Product Type

Crimp Tool

For Use With

Insulated End Connectors

Operation

Hand

Ratcheting

Yes

Crimp Profile

Indent

Overall Length

230 mm

Statut RoHS : Exempté

Pays d'origine :
TW

RS Pro Ratchet Crimping Tool for Closed End Connectors


Importance of a High Quality Crimp


When a crimping tool is used on a terminal up to two crimps can take place at the same time. One is the electrical connection between conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage

RS Pro Ratchet Crimping Tool – Overview


From RS Pro a durable, reliable and easy to use hand operated crimping tool made from high-quality materials. This hand tool consists of two handles, a ratchet mechanism, a locator for accurate positioning of the terminal and a die assembly containing 3 crimping cavities

Ratchet Mechanism


The ratchet is pre-set to a specific force and remains locked until the handles of the tool are fully closed and the dies are bottomed. The handles cannot be opened until a full crimping cycle is achieved therefore preventing partial crimps. Once the cycle is complete the handles re-open. The ratchet also enables the operator to repeatedly produce consistent, high-quality crimps

Adjustable Handle Force


This hand crimping tool features a cam that is used to adjust the handle load force. The cam locking screw is removed using a screwdriver and the cam is simply turned clockwise to increase the handle force or anti clockwise to decrease the handle force. Once the required setting is selected the cam screw is locked back into place

Key Features and Benefits


• Durable and easy to use
• Ratchet mechanism ensures that full crimp cycle is achieved
• Locator accurate terminal positioning
• Adjustable handle force

Questions and Answers


What Terminals can this Crimping Tool be used with?

This hand crimping tool is designed for crimping standard closed end crimp terminals with wire sizes of 1.5mm sq mm, 2.5mm sq mm and 6mm sq mm onto cable

Approvals

N/A

Liens connexes