RS PRO Crimp Tool Frame Crimp Tool for Tubular Cable Lugs

Voir l’ensemble des Crimp Tools

Sous-total (1 unité)*

588,73 €

(TVA exclue)

712,36 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
Commandes ci-dessous 75,00 € coût (TVA exclue) 5,95 €.
En stock
  • 1 unité(s) prête(s) à être expédiée(s)
  • Plus 47 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +588,73 €

*Prix donné à titre indicatif

N° de stock RS:
241-4710
Numéro d'article Distrelec:
304-02-980
Fabricant:
RS PRO
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

RS PRO

Product Type

Crimp Tool Frame

Sub Type

Crimp Tool

For Use With

Tubular Cable Lugs

Overall Length

440mm

Standards/Approvals

No

Maximum Wire Size mm²

150

Minimum Wire Size mm²

6

Statut RoHS : Exempté

Pays d'origine :
DE

RS Pro Ratchet Crimping Tool Frame for Tubular Cable Lugs


RS Pro Heavy Duty Hand Crimp Tool Frame - Overview


From RS Pro a sturdy, heavy duty but lightweight crimp ratchet tool frame with long handles for crimping terminals in areas where access is limited. This heavy duty crimp tool frame consists of two handles, one of which is movable, a ratchet mechanism and ratchet lever and handle lock cam. The dies for this tool frame must be purchased separately and are simply inserted into the pocket in the head of the tool frame by releasing a catch on the top of the tool.

Rotating Ratchet Mechanism


The rotating ratchet is designed to hold the cable lug or terminal securely between the dies until crimping is complete. Once the ratchet lever moves to the bottom position the crimping process is complete and the die is released. This mechanism ensures that a complete crimping cycle takes place and prevents partial crimps.

Handle Lock Cam


The handle lock cam is designed to release or lock the handles of the tool. The locked or released position is clearly indicated by a red or yellow dot.

Features and Benefits:


• Heavy duty, robust design

• Lightweight and easy to handle

• Long handles for use where access is limited

• Rotating latch mechanism ensures complete crimping cycle

• Handle lock cam for locking and releasing handles

• Catch on the head of the tool for easy die insertion

Importance of a High-Quality Crimp

When a crimping tool is used on a terminal up to two crimps can take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

FAQs


What Terminals Does this Tool Crimp?

This is a crimping tool frame only and is designed to accept the following dies for crimping tubular cable terminals;

• Stock number 241-4726 is a crimping die for use with cable lugs with wire sizes of 6 sq mm, 10 sq mm, 70 sq mm and 95 sq mm

• Stock number 241-4732 is a crimping die for use with cable lugs with wire sizes of 16 sq mm, 25 sq mm, 35 sq mm and 50 sq mm

• Stock number 241-4748 is a crimping die for use with cable lugs with wire sizes of 120 sq mm, 150 sq mm

Note

Not supplied with die sets, these must be ordered separately.

Approvals

-

Liens connexes

Recently viewed