RS PRO Crimp Tool for Insulated Terminals Red, Yellow, Blue

Voir l’ensemble des Crimp Tools

Sous-total (1 unité)*

126,19 €

(TVA exclue)

152,69 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 12 unité(s) prête(s) à être expédiée(s)
  • Plus 555 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +126,19 €

*Prix donné à titre indicatif

N° de stock RS:
533-279
Numéro d'article Distrelec:
304-04-325
Fabricant:
RS PRO
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

RS PRO

Product Type

Crimp Tool

For Use With

Insulated Terminals Red, Yellow, Blue

Height Safe

No

Overall Length

225mm

Minimum Wire Size AWG

22

Maximum Wire Size mm²

6

Maximum Wire Size AWG

10

Minimum Wire Size mm²

0.75

Statut RoHS : Exempté

Pays d'origine :
SE

RS Pro Crimp Tool For 6.0 mm² to 0.75 mm² Insulated Terminals


The 533-279 is an “Original line” hand crimp tool for insulated terminals in the range from 6.0 mm² to 0.75 mm²/AWG 22 to AWG10. The tool is designed to provide consistent and reliable crimp connections on end splices/ferrules wires.

Also known as Red, Blue and Yellow terminals. See stock numbers 534-238, 534-597, 534-468 typically. Symmetrical oval crimps are produced for the insulation and conductor barrel, either right or left handed.

Features and Benefits


• Versatile and easy to use for right hand or left hand users

• Non-slip main handle and low friction moving handle ensue a comfortable hand grip

• Provides two-hand grip in the final phase of crimping, increasing comfort and productivity

• Full cycle crimp mechanism to ensure consistent, reliable crimp

• Ratchet release mechanism to clear mis-crimps and obstructions

• Precision eccentric adjustment for consistent performance and ability to calibrate

• Each tool has a unique serial number for traceability

• Durable: life span exceeds 50000 cycles

• High strength, through hardened alloy Swedish steel construction

How to maintain the product?


• To maintain a good function and long life: Axles and other movable parts should be regularly lubricated.

• Lubrication* is recommended at least every 10,000 cycles whenever tool is exposed to dirt or other contaminants.

• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly

*Use a light mineral-free oil

Typical applications


• Maintenance & repair

How to use?


Open the tool. Insert terminal and wire in die nest from front. Close tool until ratchet release. Attention: To release ratchet mechanism, push the trigger forward when holding handles.

Note

Risk of electric shock. Do not use this tool on live wire.

Liens connexes