Bel-Stewart Voice Crimp Tool Punch Down Tool for SS-39200-0xx plugs

Voir l’ensemble des Crimp Tools
Offre groupée disponible

Sous-total (1 unité)*

606,00 €

(TVA exclue)

733,26 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • Plus 12 unité(s) expédiée(s) à partir du 20 avril 2026
  • Plus 8 unité(s) expédiée(s) à partir du 22 avril 2026
  • Plus 3 unité(s) expédiée(s) à partir du 06 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité
Prix par unité
1 - 4606,00 €
5 +589,16 €

*Prix donné à titre indicatif

N° de stock RS:
413-415
Référence fabricant:
2980075-01
Fabricant:
Bel-Stewart
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Bel-Stewart

Product Type

Crimp Tool

Sub Type

Punch Down Tool

For Use With

SS-39200-0xx plugs

Series

Voice

Standards/Approvals

RoHS

Cat 6 Shielded Termination Tool Kit


The Bell Stewart 2980075-01 is a high-quality tool designed for professionals and serious DIY enthusiast. Made from the best quality materials offer a long life and hassle-free operation. This Professional hand tool has been designed for the assembly of shielded SS-39200-0xx Cat 6 plugs only. It features a parallel action, full cycling, ratchet crimp action with a manual release. Also, the thumbscrew allows for a quick and easy die changes.

Features and Benefits:

• A highly durable hand tool designed for professional use

• Made from high-quality, lightweight materials. Weights only 460 g

• Compact size (210 mm x 60 mm)

• One-Step function allow contacts and shield to be crimped at the same time

Typical Applications:

• Maintenance & repair

• Electrical Installations

• Cable assemblies

FAQ's:

What is the difference between un-insulated and insulated crimp tools?

Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How do you maintain the product?

• Axles and other movable parts should be regularly lubricated.

• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants

• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage

Liens connexes