Knipex 0.5 to 6 mm² Crimp Tool Crimp Tool for D Sub HDE Contacts, D Sub HD 20 Contacts

Voir l’ensemble des Crimp Tools

Sous-total (1 unité)*

376,84 €

(TVA exclue)

455,98 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 4 unité(s) prête(s) à être expédiée(s)
  • Plus 4 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +376,84 €

*Prix donné à titre indicatif

N° de stock RS:
305-324
Numéro d'article Distrelec:
110-83-908
Référence fabricant:
97 54 24
Fabricant:
Knipex
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Knipex

Product Type

Crimp Tool

Sub Type

Crimp Tool

For Use With

D Sub HDE Contacts, D Sub HD 20 Contacts

Handle Type

Comfort Grip

Cutting Capacity

0.5 to 6 mm²

Height Safe

No

Overall Length

190mm

Standards/Approvals

REACH contains SVHC

Minimum Wire Size AWG

32

Minimum Wire Size mm²

0.03

Maximum Wire Size mm²

0.56

Maximum Wire Size AWG

20

Pays d'origine :
DE

Micro-connector crimping pliers with parallel crimping


Features and benefits


- Parallel crimping motion, to meet the particularly stringent requirements of micro-connectors

- Amplified force due to toggle gearing for less tiring work

- High-quality repeat crimping thanks to the integrated lock (automatic release mechanism)

- Crimping pressure precisely defined (calibrated) at the factory, also adjustable

- Optimum force transmission through lever for fatigue-reducing operation

- Low weight

- Compact design

- Ergonomic handles

- Capacities mm² / AWG : for D-Sub; HD 20; HDE micro connectors - Connectors from 0.03 to 0.56 mm² - AWG 32 to 20

- Material: Special grade chrome vanadium electrical steel, oil quenched

Typical applications


Crimping pliers can be used in many applications:

- Maintenance and repair

- Electrical installations

- Crimp shop

Product Maintenance


- To maintain proper operation and long service life, the shafts and other moving parts should be lubricated regularly.

- Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants.

- The setting of the crimping die ranges should also be checked. - Adjustment of the pressure setting pin is necessary when the tool preload decreases significantly.

*Use a light non-mineral oil

Liens connexes