ITT Cannon Trident Series Male Crimp Terminal, 18 AWG Min Crimp, 16 AWG Max
- N° de stock RS:
- 468-541
- Référence fabricant:
- T2P16MC1LZ / 192990-0100
- Fabricant:
- ITT Cannon
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 paquet de 10 unités)*
12,80 €
(TVA exclue)
15,50 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 570 unité(s) prête(s) à être expédiée(s)
- Plus 20 210 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 - 10 | 1,28 € | 12,80 € |
| 20 - 30 | 1,255 € | 12,55 € |
| 40 - 50 | 1,23 € | 12,30 € |
| 60 - 70 | 1,204 € | 12,04 € |
| 80 + | 1,164 € | 11,64 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 468-541
- Référence fabricant:
- T2P16MC1LZ / 192990-0100
- Fabricant:
- ITT Cannon
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ITT Cannon | |
| Gender | Male | |
| Product Type | Crimp Terminal | |
| For Use With | Trident Circular Connector Housing | |
| Series | Trident | |
| Current | 13A | |
| Minimum Wire Size mm² | 0.5mm² | |
| Minimum Wire Size AWG | 18AWG | |
| Contact Plating | Gold | |
| Contact Material | Brass | |
| Maximum Wire Size mm² | 1.5mm² | |
| Maximum Wire Size AWG | 16AWG | |
| Maximum Contact Resistance | 5mΩ | |
| Minimum Operating Temperature | -55°C | |
| Termination Type | Crimp | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque ITT Cannon | ||
Gender Male | ||
Product Type Crimp Terminal | ||
For Use With Trident Circular Connector Housing | ||
Series Trident | ||
Current 13A | ||
Minimum Wire Size mm² 0.5mm² | ||
Minimum Wire Size AWG 18AWG | ||
Contact Plating Gold | ||
Contact Material Brass | ||
Maximum Wire Size mm² 1.5mm² | ||
Maximum Wire Size AWG 16AWG | ||
Maximum Contact Resistance 5mΩ | ||
Minimum Operating Temperature -55°C | ||
Termination Type Crimp | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals No | ||
Crimp Two Piece Contacts
ITT TNM Shielded
The TNM connector range builds on the popular Trident and Neptune ranges from ITT Cannon. They feature full metal construction giving high reliability and durability.
RF shielding inherent in the full metal construction
Backshells enable cable braid termination so meeting EMC requirements
Signal versions have the same planform & contact arrangements as the QM range so upgrading and interchangeability can be achieved
Includes a rear rubber seal that enables IP67 rating to be maintained if only some contacts are used. The rubber seal can be discarded if a backshell is to be used. Both are rated to IP67
Cable, chassis and jam nut configurations available in standard and reversed formats
One, two or three part crimp contacts, also solder cup and PCB terminating contacts available for signal transfer. Power contacts are only required for power/signal connector types
Note
To maintain IP67 rating wire insulation diameters should be within the following diameters: Signal wires: 1.7-2.7mm Power wires: 2.7-4mm.
Use plier or ratchet style tool to crimp signal contacts. Use ratchet tool only to crimp power contacts.
Use plier or ratchet style tool to crimp signal contacts. Use ratchet tool only to crimp power contacts.
Liens connexes
- ITT Cannon Trident Series Male Crimp Terminal 16 AWG Max
- ITT Cannon Trident Series Male Crimp Terminal 24 AWG Max
- ITT Cannon, Trident Locator
- ITT Cannon Male Crimp Crimp Pin Connector, Contact Size 16/18 AWG
- ITT Cannon Female Crimp Crimp Pin Connector, Contact Size 16/18 AWG
- ITT Cannon Trident Series Male Crimp Terminal 20 AWG Max
- ITT Cannon Trident Series Male Crimp Terminal 24 AWG Max
- ITT Cannon, Trident Snap Key for use with Cannon Trident Series