Ruland, 30 mm OD 10 mm, 38 mm Length 10 mm Coupler
- N° de stock RS:
- 325-8123
- Référence fabricant:
- MWC30-10-10-SS
- Fabricant:
- Ruland
Offre groupée disponible
Sous-total (1 unité)*
109,71 €
(TVA exclue)
132,75 €
(TVA incluse)
Ajouter 1 unité pour bénéficier d'une livraison gratuite
En stock
- 15 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 9 unité(s) expédiée(s) à partir du 18 mars 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 109,71 € |
| 5 - 9 | 105,33 € |
| 10 + | 103,12 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 325-8123
- Référence fabricant:
- MWC30-10-10-SS
- Fabricant:
- Ruland
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Ruland | |
| Product Type | Coupler | |
| Outside Diameter | 30 mm | |
| Length | 38mm | |
| Maximum Speed | 6000rpm | |
| Torque Rating | 6.9Nm | |
| Number of Beams | 4 | |
| Misalignment - Angular | 3° | |
| Style | Clamp | |
| Misalignment - Parallel | 0.38mm | |
| Misalignment - Axial | 0.25mm | |
| Minimum Operating Temperature | -40°C | |
| Bore Size B | 10mm | |
| Material | Stainless Steel | |
| Bore Size A | 10mm | |
| Series | MW | |
| Maximum Operating Temperature | 176°C | |
| Standards/Approvals | DIN 912 12.9, REACH, RoHS3 | |
| Screw Size | M4 | |
| Sélectionner tout | ||
|---|---|---|
Marque Ruland | ||
Product Type Coupler | ||
Outside Diameter 30 mm | ||
Length 38mm | ||
Maximum Speed 6000rpm | ||
Torque Rating 6.9Nm | ||
Number of Beams 4 | ||
Misalignment - Angular 3° | ||
Style Clamp | ||
Misalignment - Parallel 0.38mm | ||
Misalignment - Axial 0.25mm | ||
Minimum Operating Temperature -40°C | ||
Bore Size B 10mm | ||
Material Stainless Steel | ||
Bore Size A 10mm | ||
Series MW | ||
Maximum Operating Temperature 176°C | ||
Standards/Approvals DIN 912 12.9, REACH, RoHS3 | ||
Screw Size M4 | ||
- Pays d'origine :
- US
Stainless Steel Flexible Shaft Couplings
Designed to perform where higher speeds, greater misalignment, and limited lubrication would exceed the capabilities of other couplings. Each coupling is manufactured as one piece, thereby eliminating mechanical joints and possible failure points.Two fixing styles available:,Typical applications include encoders, stepper motors, robotics, measuring instruments, servo systems, pumps, valves, fans etc., (i) Set Screw style is secured using one grub-screw per shaft (staggered at 120°) , (ii) Clamp style fixing uses one socket head cap screw per shaft.
Constant velocity couplings with high torque capacity and zero backlash
Torsionally rigid one-piece construction
Not temperature sensitive
High or low speed operation and reversible
No lubrication required
Up to 3° of axial misalignment allowable
Note
The coupling shown represents the clamp style fixing
Liens connexes
- Ruland Beam 10mm Bore, 38mm Length Flexible Coupling
- Ruland Beam Coupling 10mm Bore, 30mm Length Coupler
- Ruland Beam Coupling 12mm Bore, 30mm Length Coupler
- Ruland Beam Coupling 10mm Bore, 57.2mm Length Coupler
- Ruland Beam 11mm Bore, 38mm Length Flexible Coupling
- Ruland Beam 12mm Bore, 38mm Length Flexible Coupling
- Ruland Beam Coupling 10mm Bore, 30mm Length Coupler
- Ruland Beam 9mm Bore, 38mm Length Flexible Coupling