Kubler AK07.00 Counter, 7 Digit, 25Hz, 24 V dc
- N° de stock RS:
- 297-3039
- Référence fabricant:
- 1.130.000.033
- Fabricant:
- Kubler
Sous-total (1 unité)*
25,11 €
(TVA exclue)
30,38 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 133 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 8 unité(s) expédiée(s) à partir du 19 janvier 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 25,11 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 297-3039
- Référence fabricant:
- 1.130.000.033
- Fabricant:
- Kubler
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Kubler | |
| Supply Voltage | 24 V dc | |
| Function | Counter | |
| Input Type | Voltage | |
| Connection Type | Solder Pin | |
| Reset Method | No Reset | |
| Number of Digits | 7 | |
| Mounting Type | Plug In | |
| Count Direction | Up | |
| Digit Height | 4 mm | |
| Maximum Count Frequency | 25Hz | |
| Series | AK07.00 | |
| Sélectionner tout | ||
|---|---|---|
Marque Kubler | ||
Supply Voltage 24 V dc | ||
Function Counter | ||
Input Type Voltage | ||
Connection Type Solder Pin | ||
Reset Method No Reset | ||
Number of Digits 7 | ||
Mounting Type Plug In | ||
Count Direction Up | ||
Digit Height 4 mm | ||
Maximum Count Frequency 25Hz | ||
Series AK07.00 | ||
- Pays d'origine :
- DE
Kubler Digital Counter
The Kubler AK07.00 series digital counter is a 7-digit electromechanical base mount counter has 24VDC supply voltage. As a base mount counter with a very high level of shock resistance, it can be used for numerous diverse application areas. This counter has a maximum count frequency of 25Hz.
PCB, surface and DIN rail mounting
All the units are non-resettable and are continuously rated. Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals. The count rate of all products is 10Hz.
PCB, surface and DIN rail mounting
All the units are non-resettable and are continuously rated. Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals. The count rate of all products is 10Hz.
Features and Benefits
Low power consumption
suitable for battery operation
Non reset totalising counter
Magnifying lens increases readout to 4mm
Retains count during power failure
Unaffected by shock, vibration or magnetic fields
Operating temperature ranges between -20°C and 70°C
Non reset totalising counter
Magnifying lens increases readout to 4mm
Retains count during power failure
Unaffected by shock, vibration or magnetic fields
Operating temperature ranges between -20°C and 70°C
Applications
General quantity counting
Alarm systems
coin-operated machines
Electricity meters
Vending and slot machines
Photocopiers and medical equipment
Alarm systems
coin-operated machines
Electricity meters
Vending and slot machines
Photocopiers and medical equipment
Certifications
IP65 rated