Hengstler TICO 772 Counter, 6 Digit LCD, 60kHz, 115 V ac

Visuel non contractuel

Voir l’ensemble des Counter ICs

Sous-total (1 unité)*

207,47 €

(TVA exclue)

251,04 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
Temporairement en rupture de stock
  • Expédition à partir du 07 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +207,47 €

*Prix donné à titre indicatif

N° de stock RS:
704-3149
Référence fabricant:
0 772 122
Fabricant:
Hengstler
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Hengstler

Supply Voltage

115 V ac

Count Mode

Minutes, Seconds

Display Type

LCD

Input Type

Voltage

Function

Counter

Connection Type

Plug, Screw

Reset Method

Automatic, Manual

Number of Digits

6

Mounting Type

Panel Mount

Output / Interface

Relay

Digit Height

9.3 mm

Maximum Count Frequency

60kHz

Display Range

0.0001 → 99 9999

Maximum Operating Temperature

+50°C

Measurement Range

0.0001 → 99 9999

Series

TICO 772

Minimum Operating Temperature

0°C

Weight

200g

Pays d'origine :
DE

Multifunctional Counter - tico 772


Universally applicable as tachometer, timer, shift-counter and batch-counter

Simplified handling

Separate preset adjustment (signal 1, trail preset, range or limit value)

Versatile and easy to program, 4 keys to directly address presets, prescaler and seperate totalizer

Clearly readable display with large digits

Display and preset range: -999 999 to +999 999

Alarm signal: display flashes when preset 0, 1 or 2 are active

Input frequency up to 60 kHz

Relay outputs: 250Vac / 30Vdc / 5A

Easy installation due to pluggable terminals

3 Presets

IP65 protection (front panel)

Typical applications:


Time controlling

Position indication

Batch counting

Cutting to length

Rotation speed controlling

Hengstler Panel Mounting 48 x 48


Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count frequency of either 30Hz or 5kHz depending on setting. Inputs are either NPN/PNP signal or contact closure.

Note

The highest count frequency of 60 kHz can only be reached at a special calibration and parameter, this is otherwise quoted at 30 kHz

Liens connexes