Elesa DD52R Counter, Counter, 5 Digit
- N° de stock RS:
- 382-6518
- Référence fabricant:
- CE.82133-rb
- Fabricant:
- Elesa
Sous-total (1 unité)*
82,99 €
(TVA exclue)
100,42 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 22 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 20 unité(s) expédiée(s) à partir du 23 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 82,99 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 382-6518
- Référence fabricant:
- CE.82133-rb
- Fabricant:
- Elesa
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Elesa | |
| Product Type | Counter | |
| Function | Counter | |
| Direction of Rotation | Clockwise | |
| Number of Digits | 5 | |
| Count Direction | Top Coming | |
| Digit Height | 85mm | |
| Weight | 97g | |
| Standards/Approvals | No | |
| Series | DD52R | |
| Meter Type | Counter | |
| Sélectionner tout | ||
|---|---|---|
Marque Elesa | ||
Product Type Counter | ||
Function Counter | ||
Direction of Rotation Clockwise | ||
Number of Digits 5 | ||
Count Direction Top Coming | ||
Digit Height 85mm | ||
Weight 97g | ||
Standards/Approvals No | ||
Series DD52R | ||
Meter Type Counter | ||
Non conforme
- Pays d'origine :
- IT
Elesa Digital Mechanical Position Indicator
The Elesa DD52 series mechanical resolution counter is a 5-digit direct drive, digital position indicator. It has clockwise shaft rotation with a maximum shaft speed of 250rpm. It is the black case, high-resistance, polyamide based (PA) technopolymer. It can be used for reading settings and outputs on machinery, as well as equipment requiring adjustment with the help of rotating shafts or lead screws.
Operating use:
To give an exact reading of distance moved by relating the reading of the indicator to the thread pitch of the shaft or lead screw (type dependant on the pitch -see table)
To count the number of turns of a shaft (types 001.00 or 0001.0) for an operator to set a specific setting to perform a given function
Fitting Instructions:
Drill 6mm by 10mm deep hole 22mm from the centre of the shaft to accept rear locating pin
Zero set shaft and indicator reading
Locate on the shaft and tighten the grub screw
Features and Benefits
Pitch is 1.0
Display after 1 rev is 0001.0
Impact resistant thermoplastic case
Ultrasonically welded to prevent tampering and dirt ingression
Rear brass bushing with double sealing
Drive shaft diameter is 20mm
Applications
Material handling equipment
Rapid transit vehicles
Street sweepers
Farm machinery
Carts for recreational use
Certifications
IP67 rated