Kubler K 07.90 Counter, Counter, 7 Digit, 25 Hz 24V dc
- N° de stock RS:
- 297-3045
- Référence fabricant:
- 1.130.900.033
- Fabricant:
- Kubler
Visuel non contractuel
Sous-total (1 unité)*
26,08 €
(TVA exclue)
31,56 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 10 unité(s) expédiée(s) à partir du 01 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 26,08 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 297-3045
- Référence fabricant:
- 1.130.900.033
- Fabricant:
- Kubler
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Kubler | |
| Product Type | Counter | |
| Function | Counter | |
| Connection Type | Solder Pin | |
| Reset Method | No Reset | |
| Direction of Rotation | Up | |
| Number of Digits | 7 | |
| Mount Type | PCB | |
| Maximum Supply Voltage | 24V dc | |
| Count Direction | Up | |
| Digit Height | 4mm | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | 60°C | |
| Depth | 32.7mm | |
| Weight | 18g | |
| Standards/Approvals | No | |
| Maximum Count Frequency | 25Hz | |
| Cutout Width | 30mm | |
| Cutout Height | 13mm | |
| Series | K 07.90 | |
| Meter Type | Electromechanical | |
| Sélectionner tout | ||
|---|---|---|
Marque Kubler | ||
Product Type Counter | ||
Function Counter | ||
Connection Type Solder Pin | ||
Reset Method No Reset | ||
Direction of Rotation Up | ||
Number of Digits 7 | ||
Mount Type PCB | ||
Maximum Supply Voltage 24V dc | ||
Count Direction Up | ||
Digit Height 4mm | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature 60°C | ||
Depth 32.7mm | ||
Weight 18g | ||
Standards/Approvals No | ||
Maximum Count Frequency 25Hz | ||
Cutout Width 30mm | ||
Cutout Height 13mm | ||
Series K 07.90 | ||
Meter Type Electromechanical | ||
- Pays d'origine :
- DE
Non Reset Totalising Counters
Magnifying lens increases readout to 4mm
Retains count during power failure
Unaffected by shock, vibration or magnetic fields
PCB, Surface & DIN Rail Mounting
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.
Liens connexes
- Kubler K 07.90 Counter 7 Digit, 10 Hz 12V dc
- Kubler K 47.20 Counter 7 Digit Analogue, 10 Hz 24V dc
- Kubler K 67.20 Counter 7 Digit Analogue, 10 Hz 24V dc
- Kubler K 07.20 Counter 7 Digit, 25 Hz 230V
- Kubler K 07.20 Counter 7 Digit, 10 Hz 115V ac
- Kubler K 47.20 Counter 7 Digit Analogue, 10 Hz 5V
- Kubler AK07.00 Counter 7 Digit, 25 Hz 24V dc
- Kubler K07 Counter 7 Digit, 10 Hz 24V dc