Kubler SK 07.1 Counter, Counter, 7 Digit Analogue, 10 Hz 12V dc
- N° de stock RS:
- 202-1166
- Référence fabricant:
- 1.132.101.012
- Fabricant:
- Kubler
Visuel non contractuel
Sous-total (1 unité)*
37,43 €
(TVA exclue)
45,29 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- Expédition à partir du 13 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 37,43 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 202-1166
- Référence fabricant:
- 1.132.101.012
- Fabricant:
- Kubler
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Kubler | |
| Product Type | Counter | |
| Count Mode | Impulse | |
| Display Type | Analogue | |
| Function | Counter | |
| Connection Type | Clamp | |
| Reset Method | No Reset | |
| Direction of Rotation | Up | |
| Number of Digits | 7 | |
| Mount Type | DIN Rail | |
| Maximum Supply Voltage | 12V dc | |
| Count Direction | Up | |
| Digit Height | 4mm | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | 60°C | |
| Depth | 58mm | |
| Maximum Count Frequency | 10Hz | |
| Weight | 55g | |
| Standards/Approvals | No | |
| Meter Type | Electromechanical | |
| Series | SK 07.1 | |
| Sélectionner tout | ||
|---|---|---|
Marque Kubler | ||
Product Type Counter | ||
Count Mode Impulse | ||
Display Type Analogue | ||
Function Counter | ||
Connection Type Clamp | ||
Reset Method No Reset | ||
Direction of Rotation Up | ||
Number of Digits 7 | ||
Mount Type DIN Rail | ||
Maximum Supply Voltage 12V dc | ||
Count Direction Up | ||
Digit Height 4mm | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature 60°C | ||
Depth 58mm | ||
Maximum Count Frequency 10Hz | ||
Weight 55g | ||
Standards/Approvals No | ||
Meter Type Electromechanical | ||
Series SK 07.1 | ||
- Pays d'origine :
- DE
Two Module Wide Counter SK07
Compact adding counter for DIN rail mounting to DIN 46277
Highly shock proof - IP50 front panel
Data retention at power failure
Long life time (50 million counts)
PCB, Surface & DIN Rail Mounting
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.