onsemi MC74HC393A, Counter 6V
- N° de stock RS:
- 186-9089
- Référence fabricant:
- MC74HC393ADG
- Fabricant:
- onsemi
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 tube de 55 unités)*
15,235 €
(TVA exclue)
18,425 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 14 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le tube* |
|---|---|---|
| 55 - 55 | 0,277 € | 15,24 € |
| 110 - 495 | 0,22 € | 12,10 € |
| 550 - 990 | 0,174 € | 9,57 € |
| 1045 - 2475 | 0,165 € | 9,08 € |
| 2530 + | 0,161 € | 8,86 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 186-9089
- Référence fabricant:
- MC74HC393ADG
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Product Type | Counter | |
| Reset Method | Asynchronous | |
| Mount Type | Surface | |
| Count Direction | Uni-Directional | |
| Maximum Supply Voltage | 6V | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | RoHS | |
| Series | MC74HC393A | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Product Type Counter | ||
Reset Method Asynchronous | ||
Mount Type Surface | ||
Count Direction Uni-Directional | ||
Maximum Supply Voltage 6V | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals RoHS | ||
Series MC74HC393A | ||
High-Performance Silicon-Gate CMOS The MC74HC393A is identical in pinout to the LS393. The device inputs are compatible with standard CMOS outputs, with pullup resistors,they are compatible with LSTTL outputs. This device consists of two independent 4-bit binary ripple counters with parallel outputs from each counter stage. A divide-by 256 counter can be obtained by cascading the two binary counters. Internal flip-flops are triggered by high-to-low transitions of the clock input. Reset for the counters is asynchronous and active-high. State changes of the Q outputs do not occur simultaneously because of internal ripple delays. Therefore, decoded output signals are subject to decoding spikes and should not be used as clocks or as strobes except when gated with the Clock of the HC393A.
Output Drive Capability: 10 LSTTL Loads
Outputs Directly Interface to CMOS, NMOS, and TTL
Operating Voltage Range: 2 to 6 V
Low Input Current: 1 mA
High Noise Immunity Characteristic of CMOS Devices
Chip Complexity: 236 FETs or 59 Equivalent Gates