Lapp OLFLEX CLASSIC 110 YY Control Cable, 34 Cores 20 AWG, Unscreened, 100 m, Silver Grey Polyvinyl Chloride Sheath
- N° de stock RS:
- 280-5090
- Numéro d'article Distrelec:
- 301-10-601
- Référence fabricant:
- 1119134
- Fabricant:
- Lapp
Sous-total (1 bobine de 100 mètres)*
1 214,86 €
(TVA exclue)
1 469,98 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 4 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Bobine(s) | la bobine | le mètre* |
|---|---|---|
| 1 + | 1 214,86 € | 12,149 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 280-5090
- Numéro d'article Distrelec:
- 301-10-601
- Référence fabricant:
- 1119134
- Fabricant:
- Lapp
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Lapp | |
| Series | OLFLEX CLASSIC 110 YY | |
| Product Type | Control Cable | |
| Number of Cores | 34 | |
| Conductor Material | Bare Copper | |
| Jacket Material | Polyvinyl Chloride | |
| Jacket Colour | Silver Grey | |
| Screened/Unscreened | Unscreened | |
| Cable Length | 100m | |
| Conductor Type | Stranded | |
| Maximum Operating Temperature | 80°C | |
| Standards/Approvals | acc. to IEC 60811 resp. EN 60811, EN 50395, EN 50396 | |
| American Wire Gauge | 20AWG | |
| Sélectionner tout | ||
|---|---|---|
Marque Lapp | ||
Series OLFLEX CLASSIC 110 YY | ||
Product Type Control Cable | ||
Number of Cores 34 | ||
Conductor Material Bare Copper | ||
Jacket Material Polyvinyl Chloride | ||
Jacket Colour Silver Grey | ||
Screened/Unscreened Unscreened | ||
Cable Length 100m | ||
Conductor Type Stranded | ||
Maximum Operating Temperature 80°C | ||
Standards/Approvals acc. to IEC 60811 resp. EN 60811, EN 50395, EN 50396 | ||
American Wire Gauge 20AWG | ||
Statut RoHS : Exempté
- Pays d'origine :
- DE
The Lapp OLFLEX Classic 110 VDE approved and are control cables for flexible use. Use and fixed installation for medium mechanical load conditions. They are also suitable for use in dry damp or wet areas. If using outdoors observe the indicated temperature range. These cables are limited suitable for free and continuously recurring movements. The maximum tensile load is 15 N/mm² of conductor cross-section during installation and operation. Compulsory guidance is not permitted.
Flame retardant
Silver Grey colour
Used in dry and damp and wet areas
Resistant to the effects of acids and alkalis and oils at room temperature
UV protection
Liens connexes
- Lapp OLFLEX CLASSIC 110 YY Control Cable Unscreened Silver Grey Polyvinyl Chloride Sheath
- Lapp OLFLEX CLASSIC 110 YY Control Cable Unscreened Silver Grey Polyvinyl Chloride Sheath
- Lapp OLFLEX CLASSIC 110 YY Control Cable Unscreened Silver Grey Polyvinyl Chloride Sheath
- Lapp OLFLEX CLASSIC 110 YY Control Cable Unscreened Silver Grey Polyvinyl Chloride Sheath
- Lapp OLFLEX CLASSIC 110 YY Control Cable Unscreened Silver Grey Polyvinyl Chloride Sheath
- Lapp OLFLEX CLASSIC 110 YY Control Cable Unscreened Silver Grey Polyvinyl Chloride Sheath
- Lapp OLFLEX CLASSIC 110 YY Control Cable Unscreened Silver Grey Polyvinyl Chloride Sheath
- Lapp OLFLEX CLASSIC 110 YY Control Cable Unscreened Silver Grey Polyvinyl Chloride Sheath