Lapp OLFLEX CLASSIC FD 810 Control Cable, 7 Cores 20 AWG, Unscreened, 50 m, Grey Polyvinyl Chloride Sheath
- N° de stock RS:
- 280-5078
- Numéro d'article Distrelec:
- 300-49-339
- Référence fabricant:
- 0026123
- Fabricant:
- Lapp
Sous-total (1 bobine de 50 mètres)*
221,79 €
(TVA exclue)
268,37 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 2 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Bobine(s) | la bobine | le mètre* |
|---|---|---|
| 1 + | 221,79 € | 4,436 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 280-5078
- Numéro d'article Distrelec:
- 300-49-339
- Référence fabricant:
- 0026123
- Fabricant:
- Lapp
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Lapp | |
| Series | OLFLEX CLASSIC FD 810 | |
| Product Type | Control Cable | |
| Number of Cores | 7 | |
| Conductor Material | Bare Copper | |
| Jacket Material | Polyvinyl Chloride | |
| Jacket Colour | Grey | |
| Screened/Unscreened | Unscreened | |
| Cable Length | 50m | |
| Conductor Type | Extra Fine | |
| Maximum Operating Temperature | 80°C | |
| Standards/Approvals | acc. to IEC 60811, EN 50395, EN 50396 | |
| American Wire Gauge | 20AWG | |
| Sélectionner tout | ||
|---|---|---|
Marque Lapp | ||
Series OLFLEX CLASSIC FD 810 | ||
Product Type Control Cable | ||
Number of Cores 7 | ||
Conductor Material Bare Copper | ||
Jacket Material Polyvinyl Chloride | ||
Jacket Colour Grey | ||
Screened/Unscreened Unscreened | ||
Cable Length 50m | ||
Conductor Type Extra Fine | ||
Maximum Operating Temperature 80°C | ||
Standards/Approvals acc. to IEC 60811, EN 50395, EN 50396 | ||
American Wire Gauge 20AWG | ||
Statut RoHS : Exempté
- Pays d'origine :
- FR
The Lapp OLFLEX CLASSIC FD 810 cables are high flexible power and control cables for flexible use and fixed installation under normal mechanical load conditions. If using outdoors observe the indicated temperature range and use with UV protection. The maximum tensile load is 15 N/mm2 of conductor cross-section during installation and operation. Compulsory guidance is not permitted.
Outer sheath of PVC
They are also suitable for use in dry and damp or wet areas
They are suitable for linear and automated movements
They are largely resistant to acids and alkalis and certain oils at room temperature
Silver Grey in colour
UV Protection
Liens connexes
- Lapp OLFLEX CLASSIC FD 810 Control Cable Unscreened, Silver Grey Polyvinyl Chloride Sheath
- Lapp OLFLEX CLASSIC FD 810 Control Cable 2.5mm² 14 AWG Grey Polyvinyl Chloride Sheath
- Lapp OLFLEX CLASSIC FD 810 Control Cable Unscreened Silver Grey Polyvinyl Chloride Sheath
- Lapp OLFLEX CLASSIC FD 810 Control Cable Unscreened Silver Grey Polyvinyl Chloride Sheath
- Lapp OLFLEX CLASSIC FD 810 Control Cable Unscreened Silver Grey Polyvinyl Chloride Sheath
- Lapp OLFLEX CLASSIC FD 810 Control Cable Unscreened, Silver Grey Polyvinyl Chloride Sheath
- Lapp OLFLEX CLASSIC FD 810 Control Cable Unscreened, Silver Grey Polyvinyl Chloride Sheath
- Lapp OLFLEX CLASSIC FD 810 Control Cable Unscreened, Silver Grey Polyvinyl Chloride Sheath