Schneider Electric TeSyS D Contactor, 220V dc Coil, 3-Pole, 150 A, 24 W 220V dc, 3 NO, 690V

N° de stock RS:: 845-1544
Référence fabricant:: LC1D150MD
Fabricant:: Schneider Electric

Schneider Electric TeSyS D Contactor, 220V dc Coil, 3-Pole, 150 A, 24 W 220V dc, 3 NO, 690V

Sous-total (1 unité)*

676,26 €

(TVA exclue)

818,27 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Stocké-e par le fabricant

Prêt à être expédié à partir du 06 août 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	676,26 €

*Prix donné à titre indicatif

N° de stock RS:: 845-1544
Référence fabricant:: LC1D150MD
Fabricant:: Schneider Electric

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Schneider Electric
	Coil Voltage	220V dc
	Product Type	Contactor
	Number of Poles	3
	Contact Voltage	690V
	Contact Current	150A
	Series	TeSyS D
	Power Rating	24W
	Mount Type	DIN Rail
	Function	Motor Control, Resistive Load
	Normal State Configuration	3 NO
	Auxiliary Contact Configuration	1 NO/1 NC
	Number of Auxiliary Contacts	2
	Terminal Type	Screw Clamp
	Operational Current Ie	150A
	Contactor Application	Motor Control, Resistive Load
	Control Circuit Voltage Uc	220V dc
	Minimum Operating Temperature	-5°C
	Maximum Operating Temperature	60°C
	Depth	136mm
	Length	158mm
	Width	120mm
	Standards/Approvals	UL, CCC, CSA, EAC, IEC, RoHS
	Pole and Throw Configuration	3

	Sélectionner tout
	Marque Schneider Electric
	Coil Voltage 220V dc
	Product Type Contactor
	Number of Poles 3
	Contact Voltage 690V
	Contact Current 150A
	Series TeSyS D
	Power Rating 24W
	Mount Type DIN Rail
	Function Motor Control, Resistive Load
	Normal State Configuration 3 NO
	Auxiliary Contact Configuration 1 NO/1 NC
	Number of Auxiliary Contacts 2
	Terminal Type Screw Clamp
	Operational Current Ie 150A
	Contactor Application Motor Control, Resistive Load
	Control Circuit Voltage Uc 220V dc
	Minimum Operating Temperature -5°C
	Maximum Operating Temperature 60°C
	Depth 136mm
	Length 158mm
	Width 120mm
	Standards/Approvals UL, CCC, CSA, EAC, IEC, RoHS
	Pole and Throw Configuration 3

Se connecter pour voir les modèles CAO

Statut RoHS : Exempté

Pays d'origine :: FR

Schneider Electric LC1D TeSys D Contactors.

TeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of application. The TeSys D contactors offer quick simple setup while maintaining compliance with international standards.

Features and Benefits.

Built-in auxiliary contacts for added switching capability.

Screw connections: IP20 finger-safe terminals with both North American and International terminal markings.

Can be panel mounted with screws or DIN Rail mounted.

Bidirectional peak limiting diode suppressor to protect the coil.

Easily installed accessories.

Flexible control circuit to suit a wide range of applications.

What does the utilisation category AC1 and AC3 mean for the TeSys contactors?

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.

AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.

AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

What accessories are available?

Auxiliary contact blocks with serrated wiping action.

Front mount dust tight auxiliary contact blocks.

Pneumatic time delay blocks.

Transient voltage surge suppressors.

Interface modules and electronic timers.

Mechanical latching blocks.

Is the TeSys D range a double break pole type contactor?

Yes, the Tesys D range uses linear translation movement that provides double breaking of the poles.