RS Better World

Schneider Electric TeSyS D Contactor, 110V ac Coil, 3-Pole, 25 A, 11 kW 110V ac, 1 NO/1 NC, 600V ac

N° de stock RS:: 818-8486
Référence fabricant:: LC2D25G7
Fabricant:: Schneider Electric

Schneider Electric TeSyS D Contactor, 110V ac Coil, 3-Pole, 25 A, 11 kW 110V ac, 1 NO/1 NC, 600V ac

Sous-total (1 unité)*

285,07 €

(TVA exclue)

344,93 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

2 unité(s) prête(s) à être expédiée(s)

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	285,07 €

*Prix donné à titre indicatif

Notre gamme de produits Better World vous facilite l'accès à des produits plus durables et plus fiables.

En savoir plus sur les produits RS Better World

N° de stock RS:: 818-8486
Référence fabricant:: LC2D25G7
Fabricant:: Schneider Electric

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Schneider Electric
	Product Type	Contactor
	Coil Voltage	110V ac
	Number of Poles	3
	Contact Voltage	600V ac
	Contact Current	25A
	Power Rating	11kW
	Series	TeSyS D
	Function	Reversing
	Mount Type	DIN Rail
	Normal State Configuration	1 NO/1 NC
	Auxiliary Contact Configuration	1 NO/1 NC
	Number of Auxiliary Contacts	2
	Terminal Type	Screw
	Control Circuit Voltage Uc	110V ac
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	70°C
	Width	77mm
	Standards/Approvals	CSA C22.2 No 14, EN 60947-4-1, EN 60947-5-1, IEC 60947-4-1, IEC 60947-5-1, UL 508, IEC 60335-1, BV, RINA, CCC, GL, CSA, GOST, DNV, UL, UKCA, LROS
	Length	90mm
	Depth	86mm
	Better World Product	Yes
	Better World Claim	Designed for Disassembly
	Pole and Throw Configuration	3P

	Sélectionner tout
	Marque Schneider Electric
	Product Type Contactor
	Coil Voltage 110V ac
	Number of Poles 3
	Contact Voltage 600V ac
	Contact Current 25A
	Power Rating 11kW
	Series TeSyS D
	Function Reversing
	Mount Type DIN Rail
	Normal State Configuration 1 NO/1 NC
	Auxiliary Contact Configuration 1 NO/1 NC
	Number of Auxiliary Contacts 2
	Terminal Type Screw
	Control Circuit Voltage Uc 110V ac
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 70°C
	Width 77mm
	Standards/Approvals CSA C22.2 No 14, EN 60947-4-1, EN 60947-5-1, IEC 60947-4-1, IEC 60947-5-1, UL 508, IEC 60335-1, BV, RINA, CCC, GL, CSA, GOST, DNV, UL, UKCA, LROS
	Length 90mm
	Depth 86mm
	Better World Product Yes
	Better World Claim Designed for Disassembly
	Pole and Throw Configuration 3P

Se connecter pour voir les modèles CAO

Non conforme

Schneider Electric LC2D TeSys D Reversing Contactors

TeSys D reversing Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The LC2D series is preassembled with reversing power busbar and has been designed for motor control or resistive load applications. The TeSys D contactors offer quick simple setup while maintaining compliance with international standards.

Features and Benefits

• Built-in auxiliary contacts for added switching capability

• Pre-installed interlock

• Screw connections: IP20 finger-safe terminals with both North American and International terminal markings

• Can be panel mounted with screws or DIN Rail mounted

• Easily installed accessories

• Flexible control circuit to suit a wide range of applications

What does the utilisation category AC1 and AC3 mean for the TeSys contactors?

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.

AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.

AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running.

Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

What is a reversing contactor?

A reversing contactor is an assembly of two of standard contactors, with a mechanical and electrical interlock connecting them. The interlocks allow only one contactor to be closed (giving power supply to the motor) at any time.

Is the TeSys D range a double break pole type contactor?

Yes the Tesys D range uses linear translation movement that provides double breaking of the poles.

Approvals

EN 60947, VDE 0660