Better World

Schneider Electric ICT Contactor, 230V ac Coil, 2-Pole, 25 A, 1.3 W 230V ac, 2 NO, 250V ac

Voir l’ensemble des Contactors

Sous-total (1 unité)*

62,56 €

(TVA exclue)

75,70 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 30 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
  • Plus 32 unité(s) expédiée(s) à partir du 01 mai 2026
  • Plus 17 unité(s) expédiée(s) à partir du 08 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +62,56 €

*Prix donné à titre indicatif

Better World

Notre gamme de produits Better World vous facilite l'accès à des produits plus durables et plus fiables. Cliquez ici pour en savoir plus.

N° de stock RS:
791-2929
Numéro d'article Distrelec:
304-02-116
Référence fabricant:
A9C20732
Fabricant:
Schneider Electric
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Schneider Electric

Coil Voltage

230V ac

Product Type

Contactor

Number of Poles

2

Contact Voltage

250V ac

Contact Current

25A

Power Rating

1.3W

Series

ICT

Mount Type

DIN Rail

Function

Motor Control

Normal State Configuration

2 NO

Auxiliary Contact Configuration

2 NO

Terminal Type

Screw

Control Circuit Voltage Uc

230V ac

Minimum Operating Temperature

-5°C

Operational Current Ie

25A

Contactor Application

Motor Control

Maximum Operating Temperature

60°C

Length

18mm

Depth

68mm

Standards/Approvals

IEC/EN 61095, RoHS

Width

81mm

Better World Product

Yes

Pole and Throw Configuration

2P

Schneider Electric Contactor, Screw Terminal Type, 500V AC Insulation Voltage - iCT Series - A9C20732


Flip the switch and turn on your system in a flash with this modular contactor from Schneider Electric. It's a champ at handling motors, lighting and HVAC systems. As it has two normally open contacts standing at the ready and can make up to 100 switches in a day, you can rely on it to comfortably control essential equipment. Thanks to 25A current and 250V AC voltage ratings, this powerhouse can easily handle even the most demanding electrical jobs. A mechanical lifespan of one million cycles means it's built to go the distance, providing dependable performance over the long haul.

Features & Benefits


• Wide operating temperature range between -5°C and +60°C for use in tough conditions

• Performs at up to 2000m, so handles high-altitude installation

• Space-saving dimensions of 81 (W) x 18 (H) x 68.5mm (D) to fit snugly in compact arrangements

Applications


• Motorised equipment

• HVAC systems

• Lighting controls

How do I mount this contactor to my setup?


This device is a snap to install thanks to the clever clip-on mounting that fits onto a 35mm symmetrical DIN rail.

Schneider Electric Acti 9 iCT Contactors


ACTi 9 iCT Contactors from Schneider Electric provides power switching in single phase 3 phase loads. TeSys GC is a range of contactors that are safe, simple to use, and easy to install. The devices are compact in size and suitable for use in a wide variety of applications.

Features and Benefits


• Built-in auxiliary contacts for added switching capability

• Screw connections: IP20 finger-safe terminals with both North American and International terminal markings

• Can be panel mounted with screws or DIN Rail mounted

• Impulse relay function

• Day-night function

• Class-2 insulation: continuous safety for operators and unqualified personnel

What is the difference between AC-7a and AC-7b when choosing a iCT contactor?


These utilization catagories determine what load the contactors are switching:

AC-7a are for slightly inductive loads for household appliances for example mixers and blenders

AC-7b are for motor-loads for house hold appliances such as fans and central vacuums

Do spacers have to be fitted between the iCT range of Contactors?


If several contactors are fitted onto an DIN Rail then spacers should be used after every second contactor. The reason for this is that with multiple contactors side by side there can be a very high build of heat causing the devices to reach above their operating temperature. The coils themselves are 100% rated so can be on for 24 hours a day and the heat needs to be dissipated, therefore a spacer is required

Liens connexes