Better World

Schneider Electric LP1S Contactor, 12 V dc Coil, 2-Pole, 12 A 12 V dc, 2 NO, 690V ac

Voir l’ensemble des Contactors

Sous-total (1 unité)*

45,39 €

(TVA exclue)

54,92 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
Temporairement en rupture de stock
  • Expédition à partir du 13 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +45,39 €

*Prix donné à titre indicatif

Better World

Notre gamme de produits Better World vous facilite l'accès à des produits plus durables et plus fiables. Cliquez ici pour en savoir plus.

N° de stock RS:
744-8014
Référence fabricant:
LP1SK0600JD
Fabricant:
Schneider Electric
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Schneider Electric

Coil Voltage

12 V dc

Product Type

Contactor

Number of Poles

2

Contact Voltage

690V ac

Contact Current

12A

Series

LP1S

Function

Motor Control

Mount Type

DIN Rail

Normal State Configuration

2 NO

Number of Auxiliary Contacts

1

Auxiliary Contact Configuration

1 NO

Terminal Type

Screw

Control Circuit Voltage Uc

12 V dc

Operational Current Ie

12A

Minimum Operating Temperature

-20°C

Contactor Application

Resistive Load

Maximum Operating Temperature

50°C

Depth

55.5mm

Width

27 mm

Length

56mm

Standards/Approvals

UL, CSA

Better World Product

Yes

Pole and Throw Configuration

2

Schneider Electric Contactor, Insulated, 132g Weight - TeSys K Series - LP1SK0600JD


Trust this contactor from Schneider Electric to reliably switch high-current components on and off. It's just what you need for hard-working heating systems, thanks to its fast-acting contacts that immediately spring to action. The unit minimises the risk of electric arcs, so cuts down on the chance of power surges causing damage to equipment. A wide operating temperature range between -20°C and +50°C means you can put it to work in harsh conditions. With a TC protective coating, it's at minimal risk of corrosion when used in damp settings. To boost plant safety by protecting you from electric shocks, the contactor is insulated. Assembly is done in a jiffy by simply clipping it onto a DIN rail.

Features & Benefits


• End-of-life optimised for maximum recovery of materials and components

• IP2X-rated housing is protected against fingers, as well as tools larger than 12.5mm

• Minimal panel footprint, thanks to its compact dimensions of 56 (H) x 27 (W) c 55.5mm (D)

Applications


• HVAC equipment

• Water management systems

• Lifting and hoisting equipment

• Automated assembly lines

What's the switching rate of this contactor?


With a maximum operating rate of 1,200 cycles per hour, you can count on this device to keep up with the needs of demanding circuits.

Schneider Electric | LC1D TeSys K Mini Series | Contactors


TeSys K Miniature Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The TeSys SK contactors offer quick simple setup while maintaining compliance with international standards. A special armature structure design allows all devices in the range to have the same physical size and panel footprint for convenience.

Features and Benefits


• Built-in auxiliary contacts for added switching capability

• Screw connections: IP20 finger-safe terminals with both North American and International terminal markings

• Can be panel mounted with screws or DIN Rail mounted

• Coil with rectifier incorporated

• Easily installed accessories

• Instantaneous auxiliary contact

• Flexible control circuit to suit a wide range of applications

• High-fault short circuit current ratings provide the flexibility to select any component

Applications:


• Industrial control systems

• Switching contractors or relay coils

• Powering control and signalling switches

What does the utilisation category AC1 and AC3 mean for the TeSys contactors?


Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions. ;AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.;AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running.;Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

Is the TeSys SK range a double break pole type contactor?


Yes the TeSys SK range uses linear translation movement that provides double breaking of the poles.

Approvals

UL, CSA

Standards

IEC947, VDE0110, NFC63-110

Liens connexes