RS Better World

Schneider Electric LP1K Contactor, 230V dc Coil, 4-Pole, 20 A 220V, 2 NO/2 NC, 690V ac

N° de stock RS:: 744-7989
Référence fabricant:: LP1K090085MD
Fabricant:: Schneider Electric

Schneider Electric LP1K Contactor, 230V dc Coil, 4-Pole, 20 A 220V, 2 NO/2 NC, 690V ac

Sous-total (1 unité)*

47,24 €

(TVA exclue)

57,16 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

51 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	47,24 €

*Prix donné à titre indicatif

Notre gamme de produits Better World vous facilite l'accès à des produits plus durables et plus fiables.

En savoir plus sur les produits RS Better World

N° de stock RS:: 744-7989
Référence fabricant:: LP1K090085MD
Fabricant:: Schneider Electric

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Schneider Electric
	Product Type	Contactor
	Coil Voltage	230V dc
	Number of Poles	4
	Contact Voltage	690V ac
	Contact Current	20A
	Series	LP1K
	Normal State Configuration	2 NO/2 NC
	Terminal Type	Solder Pin
	Minimum Operating Temperature	-25°C
	Control Circuit Voltage Uc	220V
	Maximum Operating Temperature	50°C
	Depth	57mm
	Width	45mm
	Length	58mm
	Standards/Approvals	JIS C8201-4-1, CE, CSA, GB/T 14048.4, CCC, EN/IEC 60947-4-1, UL, UKCA, EAC, UL 60947-4-1, CB scheme, CSA C22.2 No 60947-4-1
	Better World Claim	Designed for Disassembly
	Better World Product	Yes
	Pole and Throw Configuration	4

	Sélectionner tout
	Marque Schneider Electric
	Product Type Contactor
	Coil Voltage 230V dc
	Number of Poles 4
	Contact Voltage 690V ac
	Contact Current 20A
	Series LP1K
	Normal State Configuration 2 NO/2 NC
	Terminal Type Solder Pin
	Minimum Operating Temperature -25°C
	Control Circuit Voltage Uc 220V
	Maximum Operating Temperature 50°C
	Depth 57mm
	Width 45mm
	Length 58mm
	Standards/Approvals JIS C8201-4-1, CE, CSA, GB/T 14048.4, CCC, EN/IEC 60947-4-1, UL, UKCA, EAC, UL 60947-4-1, CB scheme, CSA C22.2 No 60947-4-1
	Better World Claim Designed for Disassembly
	Better World Product Yes
	Pole and Throw Configuration 4

Se connecter pour voir les modèles CAO

Pays d'origine :: FR

Schneider Electric LP1K090085MD Miniature Contactor

The LP1K090085MD is a miniature 4 pole contactor featuring a 220 V dc operating coil and an AC-3 full load current of 20 A.

Schneider Electric LP1K TeSys K Miniature Contactors

TeSys K Silent Miniature Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The LP1K range are DC operated contactors recommended for use in areas sensitive to noise and high interference mains supplies. The TeSys K contactors offer quick simple setup while maintaining compliance with international standards. A special armature structure design allows all devices in the range to have the same physical size and panel footprint for convenience.

Features and Benefits

• Built-in auxiliary contacts for added switching capability

• Screw connections: IP20 finger-safe terminals with both North American and International terminal markings

• Can be panel mounted with screws or DIN Rail mounted

• Coil with rectifier incorporated

• Easily installed accessories

• Instantaneous auxiliary contact

• Flexible control circuit to suit a wide range of applications

• High-fault short circuit current ratings provide the flexibility to select any component

What does the utilisation category AC1 and AC3 mean for the TeSys contactors?

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions. ;AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.;AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running.;Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

Are the TeSys K contactors suitable for applications in AC4 usage?

The LP1K series is suitable up to a maximum of 440 V ac in category AC4.

Is the TeSys K range a double break pole type contactor?

Yes the TeSys K range uses linear translation movement that provides double breaking of the poles.