Références fabricant

Schneider Electric LC1D Contactor, 110V dc Coil, 3-Pole, 115 A, 30 kW 110V dc, 3 NO, 1kV ac

N° de stock RS:: 744-7100
Référence fabricant:: LC1D1156FD
Fabricant:: Schneider Electric

Schneider Electric LC1D Contactor, 110V dc Coil, 3-Pole, 115 A, 30 kW 110V dc, 3 NO, 1kV ac

Actuellement indisponible

Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.

N° de stock RS:: 744-7100
Référence fabricant:: LC1D1156FD
Fabricant:: Schneider Electric

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Schneider Electric
	Product Type	Contactor
	Coil Voltage	110V dc
	Number of Poles	3
	Contact Voltage	1kV ac
	Contact Current	115A
	Power Rating	30kW
	Series	LC1D
	Mount Type	DIN Rail
	Function	Motor Control, Resistive Load
	Normal State Configuration	3 NO
	Auxiliary Contact Configuration	1 NO/1 NC
	Number of Auxiliary Contacts	2
	Terminal Type	Lug Ring
	Operational Current Ie	200A
	Control Circuit Voltage Uc	110V dc
	Minimum Operating Temperature	-40°C
	Contactor Application	Motor Control, Resistive Load
	Maximum Operating Temperature	60°C
	Standards/Approvals	IEC 61095
	Length	158mm
	Width	120mm
	Depth	136mm
	Pole and Throw Configuration	3P

	Sélectionner tout
	Marque Schneider Electric
	Product Type Contactor
	Coil Voltage 110V dc
	Number of Poles 3
	Contact Voltage 1kV ac
	Contact Current 115A
	Power Rating 30kW
	Series LC1D
	Mount Type DIN Rail
	Function Motor Control, Resistive Load
	Normal State Configuration 3 NO
	Auxiliary Contact Configuration 1 NO/1 NC
	Number of Auxiliary Contacts 2
	Terminal Type Lug Ring
	Operational Current Ie 200A
	Control Circuit Voltage Uc 110V dc
	Minimum Operating Temperature -40°C
	Contactor Application Motor Control, Resistive Load
	Maximum Operating Temperature 60°C
	Standards/Approvals IEC 61095
	Length 158mm
	Width 120mm
	Depth 136mm
	Pole and Throw Configuration 3P

Pays d'origine :: CZ

Schneider Electric 3 Pole Contactors - LC1 Range

Schneider Electrics LC1 contactors combine long mechanical and electrical life to offer a highly reliable contactor. The LC1 contactors offer quick and simple setup while maintaining compliance with international standards.

Features and Benefits

• Typically, applications include resistive loads and motor control

• Highly reliable

• Excellent quality

• Easily installed accessories

• Built-in coil suppression

• 3 NO poles

• 1 NO + 1 NC auxiliary contact composition

• Operating time when closing

• Contactors suffixed BL accept front mount auxiliary contact blocks but only the 2-contact version, they do not accept side mounted contacts

What does the utilisation category AC1 and AC3 mean for the TeSys contactors?

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.

AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.

AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

What accessories are available?

• Auxiliary contact blocks with serrated wiping action

• Front mount dust tight auxiliary contact blocks

• Pneumatic time delay blocks

• Transient voltage surge suppressors

• Interface modules and electronic timers

• Mechanical latching blocks

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.