Better World

Schneider Electric LC1F Contactor, 440V Coil, 3-Pole, 630 A, 400 kW 440V, 3 NO, 1kV ac

Voir l’ensemble des Contactors
Actuellement indisponible
Désolés, nous ne savons pas quand ce produit sera réapprovisionné.

Better World

Notre gamme de produits Better World vous facilite l'accès à des produits plus durables et plus fiables. Cliquez ici pour en savoir plus.

Produit de remplacement

Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:

presentation
Schneider Electric TeSys G Contactor, 500V Coil, 3-Pole, 630 A, 70 W 200V, 500 V, 3 NO, 1kV
N° de stock RS
245-107

la pièce

5 091,33 €

(TVA exclue)

6 160,51 €

(TVA incluse)

N° de stock RS:
609-0071
Référence fabricant:
LC1F630
Fabricant:
Schneider Electric
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Schneider Electric

Product Type

Contactor

Coil Voltage

440V

Number of Poles

3

Contact Voltage

1kV ac

Contact Current

630A

Series

LC1F

Power Rating

400kW

Function

Motor Control, Resistive Load

Mount Type

Panel

Normal State Configuration

3 NO

Number of Auxiliary Contacts

3

Auxiliary Contact Configuration

3 NO

Terminal Type

Screw

Minimum Operating Temperature

-5°C

Control Circuit Voltage Uc

440V

Contactor Application

Motor Control, Resistive Load

Operational Current Ie

630A

Maximum Operating Temperature

55°C

Length

304mm

Depth

255mm

Standards/Approvals

CCC, CSA, EAC, IEC, RoHS, UL

Width

309mm

Better World Product

Yes

Pole and Throw Configuration

3P

Schneider Electric Contactors - LC1D TeSys D Series


Electric motor sizes are increasing, especially in applications such as HVAC+R and large industrial processes. In response, Schneider Electric is extending the TeSys range of block type contactors for AC3 duty. TeSys F Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The LC1F series has been designed for integration in control systems and for motor control or resistive load applications. The TeSys F contactors offer quick simple setup while maintaining compliance with international standards.

Features and Benefits


• North American and International terminal markings;• Panel mounted with supplied screws;• Bidirectional peak limiting diode suppressor to protect the coil;• Fully tested, approved, and certified by national and international bodies: IEC, CCC, CSA, UL;• Easily installed accessories;• Flexible control circuit to suit a wide range of applications;• For AC supply refer to the LX9 coils and for a DC supply refer to LX4 coils

Applications:


• Industrial control systems

• Switching contractors or relay coils

• Powering control and signalling switches

What does the utilisation category AC1 and AC3 mean for the TeSys contactors?


Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions. ;AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.;AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running.;Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

Simplified design, installation and maintenance


The TeSys F series features a flexible design with a wide range of compatible components to support design requirements. A wide range of auxiliaries provide additional contacts where needed and drawer-mounted coils allow easy maintenance and reduce downtime.

Is the TeSys F range a double break pole type contactor?


Yes the TeSys F range uses linear translation movement that provides double breaking of the poles.

Liens connexes